Bedienungsanleitung Panasonic SCRT50 (Seite 44 von 52) (Englisch)

618650

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

RQT8655

Troubleshooting guide

Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the chart

do not solve the problem, refer to “Customer Services Directory” on page 51.

The following do not indicate a problem with this unit:

Power Page

TV screen and video

Displays

≥Regular disc rotating sounds.

≥Poor reception due to atmospheric conditions.

≥Image disturbance during search.

≥Interruptions in reception due to periodic satellite broadcasting

breaks.

≥Operations do not work due to a poor-quality disc. (Try again using a

Panasonic disc.)

≥The unit freezes due to one of its safety devices being activated.

(Press and hold [POWER Í/I] on the main unit for 10 seconds.)

No power. ≥Insert the AC power supply cord securely into a known active AC outlet. 11

(Setup Guide)

The unit switches to the

standby mode.

≥This is a power saving feature. Change “Off Timer” in the Setup menu, if you would prefer.

≥One of the unit’s safety devices is activated. Press [POWER Í/I] on the main unit to turn the

unit on.

—

The images from this unit do

not appear on the television.

Picture is distorted.

≥Make sure that the television is connected to the VIDEO OUT terminal, S VIDEO OUT

terminal or COMPONENT VIDEO OUT terminals or HDMI AV OUT terminal on this unit.

≥Make sure that the television’s input setting (e.g., VIDEO 1) is correct.

≥The television isn’t compatible with progressive signals. Press and hold [∫] and [1 a1.3] on

the main unit at the same time for about 5 seconds. The setting will change to interlace.

≥When connecting with a component video cable to a television that is incompatible with

progressive video, check if there is also an HDMI cable connected to the other equipment. If

so, turn the power off to the device connected with an HDMI cable, and set the “HDMI Video

Output” to “Off” in the Setup menu.

≥Picture may not be seen when more than 4 devices are connected with HDMI cables.

Reduce the number of connected devices.

6–10

(Setup Guide)

—

Television reception worsens

after connecting the unit.

≥This can occur because the signals are being divided between the unit and other equipment.

It can be solved by using a signal booster, available from audio-visual suppliers. If it is not

solved by using a signal booster, consult the dealer.

—

Status messages do not appear.

≥Select “Automatic” in “Status Messages” in the Setup menu. 39

The blue background does not

appear.

≥Select “On” in “Blue Background” in the Setup menu. 39

The 4:3 aspect ratio picture

expands left and right.

Screen size is wrong.

≥Use the television to change the aspect. If your television does not have that function, set

“Progressive” in the Video menu to “Off”.

≥If you connect an HDMI cable, set “HDMI Output Display Aspect” in the Setup menu to

“Normal”.

≥Check the settings for “TV Type”, “4:3 TV Settings for DVD-Video” or “4:3 TV Settings for

DVD-RAM” in the Setup menu.

There is a lot of after-image

when playing video.

≥Set “DNR” in the Video menu to “Off”. 21

When playing DVD-Video using

progressive output, one part of

the picture momentarily

appears to be doubled up.

≥Set “Progressive” in the Video menu to “Off”. This problem is caused by the editing method or

material used on DVD-Video, but should be corrected if you use interlace output.

≥When you use the HDMI AV OUT terminal for video output, follow the steps below for setting.

1 Connect this unit to the TV with any cable except the HDMI cable.

2 Set “HDMI Video Output” in the Setup menu to “Off”.

—

There is no apparent change in

picture quality when adjusted

with the Video menu in the on-

screen menus.

≥The effect is less perceivable with some types of video. —

The display is dim. ≥Change “FL Display” in the Setup menu. 39

“12:00A” is flashing on the

unit’s display.

≥Set the clock. 15

(Setup Guide)

Compared to the actual

recorded time, less remaining

time is displayed.

≥The displayed recording/play time is converted from the number of frames at 29.97 frames

(equal to 0.999 seconds) to one second. There will be a slight difference between the time

displayed and the actual elapsed time (e.g., actual one-hour elapsed time may display as

approximately 59 minutes 56 seconds). This does not affect the recording.

—

The time recorded on the disc

and the available time shown

do not add up.

The play time shown for MP3

does not agree with the actual

time.

≥Times shown may disagree with actual times.

≥Even if you delete recorded content from DVD-R, DVD-R DL, +R or +R DL, there is no

increase in disc space.

≥Available recording space on DVD-RW (DVD-Video format) or +RW increases only when the

last recorded title is deleted. It does not increase if other titles are deleted.

≥Available recording space on DVD-R, DVD-R DL, +R and +R DL reduces if you have

repeatedly recorded and edited more than 200 times or so. (For the second layer on DVD-R

DL and +R DL, this happens after about 60 times.)

≥While searching, the elapsed time may not display correctly.

—

“U88” is displayed and the disc

cannot be ejected.

≥The unit is carrying out the recovery process. Do the following to eject the disc.

1Press [POWERÍ/I] on the main unit to switch the unit to standby.

If the unit doesn’t switch to standby, press and hold [POWER Í/I] on the main unit for

about 10 seconds. The unit is forcibly switched to standby.

2 While the unit is off, press and hold [∫] and [CH W] on the main unit at the same time for

about 5 seconds. Remove the disc.

—

“ ” is flashing.

(When using optional wireless

accessory)

≥There is no link between the main unit and the wireless accessory. Check that the wireless

accessory is plugged into the AC outlet.

≥Ensure that the digital transceiver is fully inserted into the slot of the main unit.

—

RT-book.book Page 44 Monday, March 27, 2006 5:48 PM

Panasonic SCRT50 Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SCRT50

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info