Bedienungsanleitung Panasonic SCRT50 (Seite 46 von 52) (Englisch)

618650

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

RQT8655

Troubleshooting guide

Operation (Continued) Page

Recording, scheduled recording and copying

The unit is on but cannot be

operated.

≥Recording drive or playback drive has not been selected properly.

≥Some operations may be prohibited by the disc.

≥The unit is hot (“U59” appears on the display). Wait for “U59” to disappear.

≥One of the unit’s safety devices may have been activated.

Reset the unit as follows:

1Press [POWERÍ/I] on the main unit to switch the unit to standby.

If the unit doesn’t switch to standby, press and hold [POWER Í/I] on the main unit for

about 10 seconds. The unit is forcibly switched to standby.

Alternatively, disconnect the AC power supply cord, wait one minute, then reconnect it.

2Press [POWERÍ/I] on the main unit to switch it on. If the unit still cannot be operated,

consult the dealer.

≥Condensation has formed. Wait 1 to 2 hours for it to evaporate.

12, 16

—

Cannot eject disc. ≥The unit is recording.

≥The unit may have a problem. While the unit is off, press and hold [∫] and [CH W] on the

main unit at the same time for about 5 seconds. Remove the disc and consult the dealer.

—

Startup is slow.

When the unit is turned on,

audio and video output takes a

long time.

≥Startup takes time in the following situations.

–A disc other than a DVD-RAM is inserted.

–The clock is not set.

–Immediately after a power failure or the AC power supply cord is connected.

–When the unit is connected with an HDMI cable.

—

Takes time to read DVD-RAM. ≥It may take time to read a disc if it is being used for the first time in this unit or it has not been

used for a long time.

—

During disc or card operation

the unit does not respond.

≥The selector has been set to “FM”, “AM”, “AUX”, “F MUSICP” or “R MUSICP”. Press [DRIVE

SELECT] to select “DVD” or “SD” as the source.

—

Cannot record. ≥You haven’t inserted a disc or the disc you inserted cannot be recorded on. Insert a disc the

unit can record onto.

≥[RAM] [-RW‹V›] [+R] [+R]DL] [+RW] The disc is unformatted. Format the disc using DVD

Management.

≥The write-protect tab on the cartridge is set to PROTECT, or the disc is protected with DVD

Management.

≥Some programs have limitations on the number of times they can be recorded. (CPRM)

≥The disc is full or nearly full. Erase unneeded titles or use another disc.

≥You cannot record on finalized DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, +R DL

or DVD-RW (VR format) discs.

≥Due to peculiarities of DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, +R DL or +RW

you may be unable to record onto them if you either insert and remove the disc or switch the

unit on and off while a disc is loaded, a total of fifty times.

≥DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, +R DL and +RW recorded on this unit

may not be recordable on other Panasonic DVD recorders.

≥Audio from FM/AM broadcasts cannot be recorded.

23, 31

—

Cannot record from external

equipment.

≥Check the connection is correct.

≥Select the input channel (“IN1”, “IN2” or “DV”) for the equipment you have connected.

6–9

(Setup Guide)

—

Scheduled recording does not

work properly

≥The scheduled program is incorrect or different scheduled program times overlap. Correct the

program.

≥Set the clock.

(Setup Guide)

Scheduled recording does not

stop even when [∫] is pressed.

≥If you start recording immediately after turning on the unit while “Quick Start” is set to “On”,

you cannot then stop recording for a few seconds.

≥1 Press [DRIVE SELECT] to select the DVD drive.

2 Press [∫], press [2, 1] to select “Stop recording” and then press [ENTER].

Recording stops.

—

The scheduled program remains

even after recording finishes.

≥The scheduled program remains if set to Monday - Friday, Monday - Saturday, Sunday -

Saturday or weekly.

A part or whole of a recorded

title has been lost.

≥If there is a power failure or the plug is disconnected from the household AC outlet while

recording or editing, the title may be lost or the disc may become unusable. You will have to

format the disc ([RAM] [-RW‹V›] [+RW]) or use a new disc. Please take care as we cannot offer

any guarantee regarding lost titles or discs.

The DV camcorder recording

function does not work.

≥If images cannot be recorded or if the recording is aborted, check the connections and DV

equipment settings.

≥You cannot start recording until the images from the DV equipment appear on the television.

≥Recording may not be performed as desired if the time codes on the tape in the DV

equipment are not successive.

≥Depending on the equipment, the DV camcorder recording may not operate properly.

≥You can only record audio/video images on a DV tape.

—

RT-book.book Page 46 Monday, March 27, 2006 5:48 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCRT50 Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SCRT50

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info