Bedienungsanleitung Panasonic SCVK31 (Seite 13 von 56) (Englisch)

618673

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

RQT7703

ENGLISH

You can use either deck 1 or deck 2 for tape playback.

Use normal position tapes.

High position and metal position tapes can be played, but the unit will

not be able to do full justice to the characteristics of these tapes.

1 Press [; : TAPE].

The unit comes on.

If a cassette was loaded, play starts automatically (One touch play).

2 Press [c DECK 1] or [c DECK 2] and insert the cassette.

Insert with the side to be played

facing towards you and the

exposed tape facing down.

Close the holder by hand.

3 Press and hold [PLAY MODE] on the

remote control to select the reverse mode.

Every time you press and hold the button:

: One side is played.

: Both sides are played.

: Both sides are played repeatedly until [L STOP] is pressed.

To listen to 2 tapes consecutively

Load a tape into each deck and select “ ”. Both tapes will be

played repeatedly until [L STOP] is pressed.

4 Press [; : TAPE] to start playback.

Every time you press the button: ; R

↔

F :

F : : The forward (front side) will play.

; R : The reverse side will play.

To stop tape playback

Press [L STOP].

To fast-forward or rewind

Press [4/FF/f] (fast-forward) or [g/REW/3] (rewind).

To select between loaded decks

Press [DECK 1/2] (remote control: [PLAY MODE]).

Note

•

Tape playback is momentarily interrupted if you open the other deck.

•

Tapes exceeding 100 minutes are thin and can break or get caught

in the mechanism.

•

Tape slack can get caught up in the mechanism and should be

taken up before the tape is played.

•

Endless tapes can get caught up in the deck’s moving parts if used

incorrectly. Use tapes appropriate to this unit’s auto-reverse mechanism.

Selection of tapes for recording

Use normal position tapes.

High position and metal position tapes can be used, but this unit will

not be able to record or erase them correctly.

Preparation:

Wind up the leader tape so recording can begin immediately.

1 Press [c DECK 2] and insert the cassette to be recorded.

Insert with the side to be recorded facing towards you and the

exposed tape facing down.

The tape direction is automatically set to “F :”.

To record on the reverse side

Press [; : TAPE] twice, then press [L STOP].

2 Press and hold [PLAY MODE] on the remote control to

select the reverse mode.

Every time you press and hold the button:

: One side only records.

: Both sides record (forward A reverse).

“ ” is automatically changed to “ ” when [a REC] is

pressed.

3 Select source to be recorded.

Radio recording:

Tune in the station. (A page 12)

CD recording:

1 Insert the CD(s) you want to record.

Press [:/J CD] and then [L STOP].

(Continued on next page)

Cassettes

Recording

Using the built-in sound equalizer

HEAVY (sound quality) : Adds punch to rock

SOFT (sound quality) : For background music

CLEAR (sound quality): Clarifies higher sounds

DISCO (sound field) : Produces sound with the same kind of

lengthy reverberations heard at a disco

LIVE (sound field) : Makes vocals more alive

HALL (sound field) : Adds an expansiveness to the sound to

produce the atmosphere of a great concert

hall.

Press [SOUND EQ] to select a setting.

Each time you press the button:

Note

You cannot use the built-in sound equalizer together with “MANUAL

EQ”.

Sound quality/sound field

HEAVY SOFT CLEAR

EQ-OFF

(cancelled)

DISCO LIVE HALL

Adjusting the bass and treble with

manual equalizer

1 Hold down [–MANUAL EQ] until

“MANUAL EQ” is displayed.

2 Press [;, :] to select “BASS”

“MID“ or “TREBL”.

3 While displaying “BASS”, “MID” or

“TREBL”

Press [8, 9] to adjust the level

(-3 to +3).

Sound quality/sound field

1 4

DECK 1/2

Front side

S.SOUND EQ

SOUND EQ

; :TAPE

SHIFT

ALBUM ( or )

You can enhance the bass and treble effect of the sound.

Press [S.SOUND EQ] (Main unit: [SUPER SOUND EQ]).

The button light comes on.

Press the button again to cancel.

The button light goes out.

Note

You cannot use “SUPER SOUND EQ” together with the built-in sound

equalizer/“MANUAL EQ”.

Enhancing the sound quality

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCVK31 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SCVK31

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info