Bedienungsanleitung Panasonic SCVK650 (Seite 28 von 36) (Englisch)

618676

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

RQTV0141

Using the timers

You can set the timer to come on at a certain time to wake you

up (play timer) or to record a radio station or from the music

port source (record timer).

The play and record timers cannot be used together.

Preparation:

≥Turn the unit on and set the clock (l page 7).

≥For the play timer, prepare the desired music source

(tape/disc/radio/music port source), and set the volume.

≥For the record timer, check the cassette’s erasure

prevention tabs (l page 25) and insert the tape in deck 2

(l page 25). Tune the radio station (l page 24) or select

the music port source (l page 29).

1 Press [CLOCK/TIMER] to select the timer function.

Every time you press the button:

CLOCK ) PLAY ) REC

^----- Previous display ,----}

PLAY : to set the play timer

REC : to set the record timer

(Proceed to the next step within 7 seconds)

2 ON time setting

1Press [:, C/REW] or [9, FF/D] to set the

start time.

2Press [CLOCK/TIMER].

OFF time setting

Repeat steps 1 and 2.

3 Press [ PLAY/REC] to display the timer indicator.

Every time you press the button:

PLAY ) REC ) Off

^------------------------------------}

PLAY : to turn the play timer on

REC : to turn the record timer on

(The indicator does not appear if the start and finish times

or the clock has not been set.)

4 Press [Í] to turn the unit off.

The unit must be off for the timers to operate.

≥Play timer : Play will start in the set condition at the

set time with volume increasing

gradually to the set level.

≥Record timer : The unit comes on 30 seconds before

the set time with the volume muted.

To cancel the timer

Press [ PLAY/REC] to clear the timer indicator from the

display.

(The timer comes on at the set time everyday if the timer is

on.)

To change the settings (when the unit is on)

To change the play/record times

Do steps 1, 2 and 4.

To change the source or volume

1 Press [ PLAY/REC] to clear the timer indicator from the

display.

2 Make changes to the source or volume.

3 Do steps 3 to 4.

To check the settings

Press [CLOCK/TIMER] while the unit is on or standby mode to

select “ PLAY” or “ REC”.

The settings are shown in the following order:

Play timer: start time ) finish time ) source ) volume

Record timer: start time ) finish time ) source

If you use the unit after the timers are set

After using, check that the correct tape/disc(s) are loaded

before turning the unit off.

[Note]

≥If you turn the unit off and on again while a timer is

functioning, the finish time setting will not be activated.

≥If you selected music port as the source, when the timer

comes on, the unit turns on and engages music port as the

source. Activate the equipment’s play mode and increase

the volume if you want to playback or record from the

connected portable audio equipment. (See the connected

portable audio equipment’s instruction manual.)

≥For the sleep timer, this timer turns the unit off after a set

time.

≥For Auto-off function, when disc or tape is selected as the

source. To save power, the unit turns off if it is left unused

for 10 minutes.This function does not work if the source is

tuner or music port.

1 While enjoying the desired source

Press and hold [jSLEEP/A.OFF].

Current setting appears on the display.

2 While current setting is displayed

Press [jSLEEP/A.OFF] to change the setting.

Every time you press the button:

SLEEP 30 ) SLEEP 60 ) SLEEP 90 ) SLEEP 120

^-------- SLEEP OFF !- AUTO OFF !-------}

To cancel the sleep timer

Do steps 1 and 2 to select “SLEEP OFF”.

To confirm the remaining time

Press and hold [jSLEEP/A.OFF] once.

The remaining time is shown for about 5 seconds.

To change the setting

Do steps 1 and 2 to select the new setting.

To cancel the Auto-off function

Do steps 1 and 2 to select “AUTO OFF”.

[Note]

≥The setting will change only if you press [jSLEEP/A.OFF]

right after the current setting is displayed.

≥The sleep timer will be turned off when you start recording.

≥You can use the sleep timer in combination with the

play/record timer.

≥Make sure the unit is off before the play/record timer’s start

time.

≥The Auto-off function is maintained even if the unit is turned

off.

≥If you select tuner or music port as the source, “AUTO OFF”

goes out. It comes on again when you select disc or tape.

The play/record timer

The sleep timer/Auto-off function

Using the timers

SC-VK650GCSGCTGN.book 28 ページ２００６年４月１７日　月曜日　午後５時４７分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCVK650 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SCVK650

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info