Bedienungsanleitung Panasonic SCVK82D (Seite 22 von 36) (Englisch)

618690

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

The radio

RQT8169

Manual tuning

1 Press [TUNER/AUX] (main unit: [TUNER/BAND]) to

select “FM” or “AM”.

The unit comes on.

2 Press [(] or [)] (main unit: [REW/

4/g] or

[f/

3/FF]) to select the frequency.

Press and hold [(] or [)] (main unit: [REW/4/g] or

[f/3 /FF]) until the frequency starts scrolling to start automatic

tuning. Tuning stops when a station is found.

“TUNED” is displayed when a radio station is tuned.

“ST” is displayed when a stereo FM broadcast is being received.

L If noise is excessive in FM

Press [PLAY MODE] to display “MONO”.

Monaural sound is selected and noise reduces when reception is

weak.

Press [PLAY MODE] again to cancel the mode.

“MONO” is also canceled if the frequency is changed.

The radio

For Saudi Arabia, Kuwait and Southeast Asia

L AM allocation setting (main unit only)

The step is factory-set to 9 kHz, but you can change it to receive

broadcasts allocated to 10 kHz steps.

1. Select “FM”.

2. Press and hold [TUNER/BAND].

After a few seconds the display changes to show the current

minimum frequency. Continue to hold the button down. The minimum

frequency changes and the step is changed.

To return to the original step, repeat the above steps.

Note

After changing the “allocation” setting, the frequencies you previously

preset in the memory will be cleared. Preset them again.

Preset tuning

Remote control only

There are two methods of pre-setting stations.

Automatic presetting :All the stations the tuner can receive are

preset.

Manual presetting :You can select the stations to preset and

the order they are preset in.

Up to 15 stations each can be set in the FM and AM bands.

Preparation:

Press [TUNER/AUX] to select “FM” or “AM”.

Automatic presetting

Do the following once each for FM and AM.

Preparation: Tune to the frequency where pre-setting is to begin.

Press [SHIFT] + [TUNER PGM] until the frequency

changes.

The tuner presets all the stations it can receive into the channels in

ascending order. The last station to be set is then played.

Manual presetting

Pre-set the stations one at a time.

1 Tune to the station (A see left).

2 Press [SHIFT] + [TUNER PGM].

3 While “PGM” is flashing on the display

Press the numbered buttons to select a channel.

Alternatively, press [g, REW/4] or [f, 3 /FF] then press

[SHIFT]+[TUNER PGM].

The station occupying a channel is erased if another station is

preset in that channel.

Selecting channels

Remote control only

1 Press [TUNER/AUX] to select “FM” or “AM”.

2 Press the numbered buttons or [g, REW/

4] or

[f,

3/FF] to select the channel.

•

To select a 2-digit number

e.g. 12: [h10] A [1] A[2].

PLAY MODE

TUNER PGM

, DVD/CD

, TAPE

TUNER/AUX

REW/

/FF

Numbered

buttons

SHIFT

DECK 2

, DVD/CD

STOP

REC

DECK 1/2

DECK 1

TUNER/BAND

REW/ / ,

/ /FF

, TAPE

The radio

RQT8169(22_23)new1 4/18/05, 3:29 PM22

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCVK82D Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info