Bedienungsanleitung Panasonic SCVK82D (Seite 23 von 36) (Englisch)

618690

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Cassette tapes

RQT8169

Cassette tapes

Front side

Playback

You can use either deck 1 or deck 2 for tape playback.

Use normal position tapes.

High position and metal position tapes can be played, but the unit will

not be able to do full justice to the characteristics of these tapes.

1 Press [; :, TAPE].

The unit comes on.

If a cassette was loaded, play starts automatically (One touch play).

2 Press [c DECK 1] or [DECK 2 c] on the main unit and

insert the cassette.

Insert with the side to be played

facing towards you and the exposed

tape facing down.

Close the holder by hand.

3 Press [; :, TAPE] to start playback.

Every time you press the button: F: ↔ ;R

F:: Forward side is played.

;R: Reverse side is played.

To stop tape playback

Press [L] (main unit: [L STOP]).

To select the reverse mode

While TAPE is selected as the source

Press and hold [PLAY MODE].

Every time you press and hold the button:

: One side is played.

: Both sides are played. (forward → reverse)

Play stops at the end of the reverse side.

: Both sides are played repeatedly until [L] (main unit: [L STOP])

is pressed.

To listen to 2 tapes consecutively, load a tape into each deck and

select “

”. Both tapes will be played repeatedly until [L] (main unit:

[L STOP]) is pressed.

To fast-forward or rewind

Press [REW/4/g] (rewind) or [f/3/FF] (fast-forward).

To select between loaded decks

Press [PLAY MODE] (main unit: [DECK 1/2]).

Note

• Tape playback is momentarily interrupted if you open the other deck.

• Tapes exceeding 100 minutes are thin and can break or get caught

in the mechanism.

• Tape slack can get caught up in the mechanism and should be

taken up before the tape is played.

• Endless tapes can get caught up in the deck’s moving parts if used

incorrectly. Use tapes appropriate to this unit’s auto-reverse

mechanism.

Recording

Selection of tapes for recording

Use normal position tapes.

High position and metal position tapes can be used, but this unit will

not be able to record or erase them correctly.

Preparation:

• Wind up the leader tape so recording can begin immediately.

• Press [; :, TAPE] and then [L] (main unit: [L STOP]).

1 Press [DECK 2 c] on the main unit and insert the

cassette to be recorded.

Insert with the side to be recorded facing towards you and the

exposed tape facing down.

The tape direction is automatically set to “F:”.

2 Press and hold [PLAY MODE] to select the reverse

mode.

Every time you press and hold the button:

: One side only records.

, : Both sides record (forward → reverse).

“

” is automatically changed to “ ” when [[ REC] is pressed.

3 Select the source to be recorded.

Radio recording:

Tune to the required station. (A page 22)

Disc recording:

Insert the disc(s) you want to record.

Press [:, DVD/CD] and then [L] (main unit: [L STOP]).

Prepare the desired disc recording mode.

• To record programmed items [A do steps 1–2 on page 18,

“Program play (up to 32 items)”].

Ensure disc is stopped.

Tape-to-tape recording:

Press [; :, TAPE] and then [L] (main unit: [L STOP]).

Press [c DECK 1] on the main unit and insert the cassette

you want to record.

4 Press [[ REC] on the main unit to start recording.

To stop recording

Press [L] (main unit: [L STOP]).

If the tape finishes before the disc

The disc continues playing. Press [L] (main unit: [L STOP]) to stop it.

Note

• Multi-channel sources (3 to 5.1 channels) are automatically down-

mixed to 2 channels during recording.

• Changes to volume and sound or field quality do not affect

recording.

• You cannot open deck 1 while recording.

• You cannot fast-forward or rewind one deck while recording with

the other.

Erasure prevention

Use a screwdriver or similar

object to break out the tab.

To re-record on a protected cassette

Cover the hole with adhesive tape.

To erase a tape

1. Press [; :, TAPE] and then

[L] (main unit: [L STOP]).

2. Insert the recorded tape into deck 2.

Ensure there is no tape in deck 1.

3. Press and hold [PLAY MODE] to select the reverse mode.

4. Press [[ REC] on the main unit.

Side A

Tab for side B Tab for side A

Adhesive tape

RQT8169(22_23) 6/2/05, 10:16 AM23

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCVK82D Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info