711546

Panasonic SD-ZP2000 Seite 10

10
Zoom out
Zoom in
Vorherige Seite
1/122
Nächste Seite
GB18 GB19
Problem Cause and Action
My bread does not rise well.
The top of my bread is uneven.
Your flour gluten quality is poor, or you have not used strong bread flour. (Gluten quality can vary depending on
temperature, humidity, how the flour is stored, and the season of harvest.)
➝
Try another type, brand or another batch of flour.
The dough becomes too firm as you haven’t used enough liquid.
➝
Strong bread flour with higher protein content absorbs more water than others, try adding an extra 10 – 20 mL.
You are not using the right type of dry yeast.
➝
Use a dry yeast from a sachet, which has instant dry yeast written on it.
This type does not require pre - fermentation.
You are not using enough dry yeast, or your dry yeast is old.
➝
Use the measuring spoon provided. Check the dry yeast’s expiry date. (Keep dry yeast in refrigerator)
The dry yeast has pressed liquid before kneading.
➝
Check that you have put the ingredients in the correct order according to the recipe. (P. GB11)
You have used too much salt, or not enough sugar.
➝
Check the recipe and measure out the correct amounts using the measuring spoon provided.
➝
Check that salt and sugar are not included in other ingredients.
My bread has not risen at all.
My bread is pale and sticky.
You did not use dry yeast.
➝
Place the correct amount of dry yeast into the bread pan.
You are not using enough dry yeast, or your dry yeast is old.
➝
Use the measuring spoon provided. Check the dry yeast’s expiry date. (Keep dry yeast in refrigerator)
There has been a power failure, or the machine has been stopped during breadmaking.
*
The machine switches off if it is stopped for more than 10 minutes.
➝
Remove the bread from the bread pan and start again with new ingredients.
My bread is sticky and slices
unevenly.
It was too hot when you sliced it.
➝
Allow your bread to cool on rack before slicing to release the steam.
My bread has risen too much.
You have used too much dry yeast / water.
➝
Check the recipe and measure out the correct amount using the measuring spoon (dry yeast) / measuring cup
(water) provided.
➝
Check that excess water amount is not included in other ingredients.
You have used too much flour.
➝
Carefully weigh the flour using scales.
My bread is full of air holes.
You have used too much dry yeast.
➝
Check the recipe and measure out the correct amount using the measuring spoon provided.
[Soft Bread]
You have used too much liquid.
➝
Some types of flour absorb more water than others, try using 10 – 20 mL less water.
My bread seems to have
collapsed after rising.
The quality of your flour isn’t very good.
➝
Try using a different brand of flour.
[Soft Bread]
You have used too much liquid.
➝
Try using 10 – 20 mL less water.
The crust creases and goes soft
on cooling.
[Soft Bread]
The steam remaining in the bread after baking can pass into the crust and soften it slightly.
➝
To reduce the amount of steam, try using 10
–
20 mL less water.
The sides of my bread have
collapsed and the bottom is
damp.
You have left the bread in the bread pan for too long after baking.
➝
Remove the bread promptly after baking.
There has been a power failure, or the machine has been stopped during breadmaking.
* The machine switches off if it is stopped for more than 10 minutes.
How can I keep my crust crispy?
To make your bread more crispy, you could bake it in the oven at 200 °C / 392 °F or gas mark 6 for an extra
5 minutes – 10 minutes.
There is excess oil on the
bottom of brioche.
The crust is oily.
My bread has big holes.
Did you add butter within 5 minutes of the beep?
➝
Do not put butter when display show remaining time until ready. (Step 8 of P. GB14)
Butter flavour might be weak, but it can bake.
During or after cooking
Before calling for service, please check through this section.
Problem Cause and Action
My brioche did not turn out well
when using bread mix.
Try following things:
➝
It might be baked better if dry yeast is decreased a little when using menu 12. (If adding dry yeast separately)
➝
Follow the recipe on the bread mix, but the bread mix should be between 350 – 500 g.
➝
Place the dry yeast first, follow by dry ingredients, butter, then water into the bread pan.
For additional ingredients, add them later. (P. GB14)
➝
The completion is different according to recipe on the bread mix.
Why has my bread not mixed
properly?
You haven’t put the kneading blade in the bread pan.
➝
Make sure the kneading blade is in the bread pan before you put in the ingredients.
There has been a power failure, or the machine has been stopped during breadmaking.
➝
The machine switches off if it is stopped for more than 10 minutes. You might be able to start the bread again,
though this might give poor results if kneading had already begun.
Additional ingredients are not
mixed properly.
Did you add additional ingredients into the bread pan while is flashing?
➝
Additional ingredients must be put into the bread pan during is flashing on the display.
Additional ingredients are not
mixed properly in Brioche.
Did you add additional ingredients within 5 minutes of the beep?
➝
Additional ingredients must be added while is flashing in the display.
Some of the bread mix dough is harder to mixed additional ingredients in or to flick out some of them.
➝
Decrease the additional ingredients into half.
My bread has not been baked.
The dough menu was selected.
➝
The dough menu does not include a baking process.
There has been a power failure, or the machine has been stopped during breadmaking.
➝
The machine switches off if it is stopped for more than 10 minutes. You can try baking the dough in your oven if
it has risen and proved.
There is not enough water and the motor protection device has been activated.
This only happens when the machine is overloaded and excessive force is applied to the motor.
➝
Visit place of purchase for a service consultation. Next time, check the recipe and measure out the correct
amount using the measuring cup provided.
You have forgotten to attach the kneading blade.
➝
Make sure you attach the kneading blade first. (P. GB11)
The kneading mounting shaft in the bread pan is stiff and does not rotate.
➝
If the kneading mounting shaft does not rotate when the kneading blade is attached, you will need to replace
the kneading mounting shaft unit. (Consult the place of purchase or Panasonic service centre.)
There is excess flour around
the bottom and sides of my
bread.
You have used too much flour, or you are not using enough liquid.
➝
Check the recipe and measure out the correct amount using scales for the flour or the measuring cup
provided for liquids.
The bread does not come out.
If bread sticks to bread pan and is difficult to be taken out, leave the bread pan for 5 minutes – 10 minutes to cool.
Turn the bread pan upside down using oven gloves (see P. GB12). Tap holding both hands onto a clear cooking
surface covered with kitchen towel until the bread comes out.
The kneading blade stays in the
bread when I remove it from the
bread pan.
The dough is a little stiff.
➝
Allow the bread to cool completely before removing the kneading blade carefully.
Some types of flour absorb more water than others, so try adding an extra 10 – 20 mL of water next time.
Crust has built up underneath the kneading blade.
➝
Wash the kneading blade and kneading mounting shaft after each use.
The jam has boiled over.
Too much fruit or sugar has been used.
➝
Only use the amounts of fruit and sugar specified in the recipes on P. GB16.
Jam is too runny and not firmly
set.
The fruit was under or over ripe.
Sugar was decreased too much.
Cooking time was insufficient.
Fruit with a low pectin content was used.
➝
Leave the jam to cool completely. The jam will continue to set as it cools.
➝
Use the runny jam as a sauce for desserts.
During or after cooking
Troubleshooting
English
SD-ZP2000 EN_EU_OI3.indd 18-19 16/7/2018 17:47:38
… 10 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic SD-ZP2000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info