Bedienungsanleitung Panasonic UT-MB5000 (Seite 21 von 36) (Englisch)

597888

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Useful Information



Using Recovery Disc

Use the Recovery Disc in the following conditions.



You have forgotten the administrator password.



Installation is not complete. The recovery partition in the ash memory may be broken.

Preparation

Prepare the following items:



• Recovery Disc (

Reference Manual “Recovery Disc Creation Utility”)



• USB DVD drive (optional) (refer to recent catalogs and other sources for information about the products

available)



• <Only for model with TPM> Connect the external keyboard.

Remove all peripherals (except for the USB DVD drive).

1 Connect the DVD drive to the USB port.

2 Start the Setup Utility.

Display “Charm” and touch

- [Change PC settings] - [Update and recovery] - [Recovery].

Touch [Restart now] under “Advanced startup”.

Touch [Troubleshoot] - [Advanced options] - [UEFI Firmware Settings] - [Restart].

If the password is requested, enter the Supervisor Password.

3 Write down all of the contents of the Setup Utility and touch [Exit] and double-touch

[Load Default Values].

At the conrmation message, touch [Yes].

4 Check the [UEFI Boot] setting of the Setup Utility.

When the recovery disc for Windows 8.1 is used: [Enabled]

5 Set the Recovery Disc into the DVD drive.

6 Touch [Exit] and double-touch [Save Values and Reboot].

At the conrmation message, touch [Yes].

The computer will restart.

7 Press (Rotation lock) button while [Panasonic] boot screen is displayed.

The Setup Utility starts up.

If the password is requested, enter the Supervisor Password.

8 Touch [Exit], then double-touch your DVD drive in [Boot Override].

The computer will restart.

9 Touch [Reinstall Windows] and touch [Next].

10 Touch [YES].

11 At the License Agreement screen, touch [Yes, I agree to the provisions above and wish

to continue!] and touch [Next].

12 Touch [Next].

If the option is displayed, select the setting and touch [Next].

[Reinstall Windows to the System Disk to factory default.]

Select this option when you want to install Windows to the factory default. After installation, you can create a

new partition. For how to create a new partition, refer to “To change the partition structure” (

page 13).

[Reinstall to the OS related partitions.]

Select this option when the ash memory has already been divided into several partitions. For how to create

a new partition, refer to “To change the partition structure” (

page 13).

You can keep the partition structure.

This does not appear if Windows cannot be installed to the recovery partition and the area usable by Windows.

13 Attheconrmationmessage,touch[YES].

Installation starts according to the instructions on the screen. (It will take approximately 30 - 45 minutes.)

Do not interrupt installation, for example by turning off the computer.



Otherwise installation may become unavailable as Windows may not start up or the data may be corrupted.

DFQW5829ZA_UT-MB_8_OI_M.indb 21 2013/11/13 13:23:25

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic UT-MB5000 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info