Bedienungsanleitung Panasonic WV-SC384 (Seite 108 von 244) (Englisch)

550986

108

Zoom out

Zoom in

Vorherige Seite

1/244

Nächste Seite

• Default: Off

[Mask area]

When “Off” is selected for “Wide dynamic range” and “Back light compensation (BLC)”, it is possible to

compensate for backlight by masking brighter areas.

Refer to page 111 for information on how to set the mask area.

[Light control mode]

SC384

Select the light control mode from the following.

• Outdoor scene: Depending on the brightness level (illuminance), the iris will automatically be controlled

together with the shutter speed adjustment to control light. When shooting a bright subject such as outdoor,

etc., select this parameter. Be aware that flicker may occur when a subject is under fluorescent lighting.

• Indoor scene (60 Hz) / Indoor scene (50 Hz): The shutter speed will automatically be adjusted to prevent

flicker caused by fluorescent light. Select 50 Hz or 60 Hz corresponding to the location where the camera

is in use.

• Fix shutter: The selected value will be set as the fixed shutter speed.

1/30 Fix, 3/100 Fix, 3/120 Fix, 2/100 Fix, 2/120 Fix, 1/100 Fix, 1/120 Fix, 1/250 Fix, 1/500 Fix, 1/1000 Fix,

1/2000 Fix, 1/4000 Fix, 1/10000 Fix

• Default: Outdoor scene

Note

• When a faster shutter speed is selected (up to 1/10000), it is possible to capture a fast moving object

with less blur.

• When a faster shutter speed is selected, the sensitivity will become lower. Smear also may appear

under bright light condition.

• When “On” is selected for “Wide dynamic range”, “Fix shutter” is not available. To configure “Fix

shutter”, set “Wide dynamic range” to “Off”.

[Light control mode]

SW175

SW174W

SW172

ST165

ST162

Select the light control mode from the following.

• Indoor scene (50 Hz) / Indoor scene (60 Hz): The shutter speed will automatically be adjusted to prevent

flicker caused by fluorescent light. Select 50 Hz or 60 Hz corresponding to the location where the camera

is in use.

• ELC(Maximum exposure time): The lighting control will be automatically performed by adjusting shutter

speed in the range of ELC.

ELC(1/30s)/ ELC(3/100s)/ ELC(3/120s)/ ELC(2/100s)/ ELC(2/120s)/ ELC(1/100s)/ ELC(1/120s)/

ELC(1/250s)/ ELC(1/500s)/ ELC(1/1000s)/ ELC(1/2000s)/ ELC(1/4000s)/ ELC(1/10000s)

• Default: ELC(1/30s)

Note

• The shorter the maximum exposure time is, the more accurately it is possible to capture a fast moving

object with less blur.

• When a faster shutter speed is selected, the sensitivity will become lower.

• When a faster shutter speed is selected, flickering may happen.

In case flickering happens, it may be improved by configuring the following settings.

In the area of 50 Hz power supply frequency: ELC(3/100s), ELC(2/100s), ELC(1/100s)

In the area of 60 Hz power supply frequency: ELC(3/120s), ELC(2/120s), ELC(1/120s)

When flickering still remains, set flicker-less mode.

• Under extremely strong lighting, flickering may happen even when “Indoor scene” is selected for “Light

control mode”.

When the brightness (illuminance) level on the screen is set to a relatively low level with the [Brightness]

buttons, flickering may frequently happen.

108 Operating Instructions

11 Configure the settings relating to images and audio [Image/Audio]

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic WV-SC384 Seite 108

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic WV-SC384

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info