Bedienungsanleitung Panasonic WV-SC384 (Seite 109 von 244) (Englisch)

550986

109

Zoom out

Zoom in

Vorherige Seite

1/244

Nächste Seite

• When the setting for “Light control mode” is “Indoor scene (50 Hz)”, “Indoor scene (60 Hz)” or “ELC”

whose maximum exposure time is 1/2000s or longer, brightness may not be remarkably changed even

when [Brightness] buttons are clicked.

• In such cases, either of the following can reduce flickering.

– Moderate the illumination intensities of objects by changing the camera direction.

– Set the brightness (illuminance) level on the screen to a brighter level with the [Brightness] buttons.

• When “On” is selected for “Wide dynamic range (WDR)”, only “Indoor scene (50 Hz)”, “Indoor scene

(60 Hz)” and “ELC(1/30s)” are available.

[AGC]

Select a method of gain adjustment from the following.

• On(High)/On(Mid)/On(Low): When the luminance of the subject becomes darker, gain will be

automatically incremented and screen will become brighter. “High”, “Mid” and “Low” are indications of gain

level.

• Off: Images will be captured with the fixed gain level.

• Default: On(High)

[Auto slow shutter]

The electronic sensitivity enhancement (sensitivity up) can be carried out by adjusting the storage time of the

sensor.

The following are available for the recording duration.

Off(1/30s), Max.2/30s, Max.4/30s, Max.6/30s, Max.10/30s, Max.16/30s

• Default: Off(1/30s)

IMPORTANT

• When “On” is selected for “Auto slow shutter”, frame rate may become lower. Noise or white dots

(blemishes) may sometimes appear.

Note

• When “Max. 16/30s” is selected, for example, sensitivity will automatically be increased up to x16.

When “Off” is selected for “AGC”, this setting is unavailable.

SW175

SW174W

SW172

ST165

ST162

• When “Off” is selected for “AGC”, “Off(1/30s)” will be set for “Auto slow shutter”.

[Day & Night(electrical)]

Select switching between the color mode and the black & white mode from the following.

• Off: The color mode is selected.

• Auto: Switches from color to black-and-white images when the ambient brightness (illuminance) of the

camera is approx. 1.0 lx or less

SC384

/approx. 4 lx or less

SW175

SW174W

ST165

/approx. 2 lx or

less

SW172

ST162

. It takes time to switch between modes.

• Default: Off

[White balance]

Select a method of white balance adjustment from the following.

White color can be adjusted by “Red gain” and “Blue gain”.

• ATW1: Selects the automatic tracing white balance mode. The camera will constantly check the color

temperature of the light source and adjust the white balance automatically. Operating color temperature

range is approx. 2,700 K - 6,000 K.

• ATW2: Selects the automatic tracing white balance mode under a sodium lamp. The camera will adjust

the white balance automatically under a sodium lamp. Operating color temperature range is approx. 2,000

K - 6,000 K.

Operating Instructions 109

11 Configure the settings relating to images and audio [Image/Audio]

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic WV-SC384 Seite 109

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic WV-SC384

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info