Bedienungsanleitung Panasonic WV-SC384 (Seite 172 von 244) (Englisch)

550986

172

Zoom out

Zoom in

Vorherige Seite

1/244

Nächste Seite

Note

• The camera will restart after the connection setting is changed.

• When using the self-signed certificate:

If the camera is accessed using the HTTPS protocol for the first time, the warning window will be

displayed. In this case, follow the instructions of the wizard to install the self-signed certificate.

(®page 181)

• When using the server certificate:

In advance, install the root certificate and intermediate certificate on the browser in use. Follow the

instructions of CA for how to obtain and install these certificates.

• When the camera is accessed using the HTTPS protocol, the refresh interval and frame rate of images

may be lower.

• When the camera is accessed using the HTTPS protocol, it may take time to display images.

• When the camera is accessed using the HTTPS protocol, the images may be distorted or audio may

be interrupted.

• The maximum number of concurrent access user varies depending on the maximum image size and

transmission format.

[FTP access to camera]

Select “Allow” or “Forbid” to determine whether to allow or forbid the FTP access to camera.

• Default: Forbid

[Bandwidth control(bit rate)]

Select the total bit rate for data transmission from the following.

Unlimited/ 64kbps/ 128kbps/ 256kbps/ 384kbps/ 512kbps/ 768kbps/ 1024kbps/ 2048kbps/ 4096kbps/

8192kbps

• Default: Unlimited

Note

• When selecting “64kbps”, select “Off” for “Audio transmission/reception” on the [Audio] tab.

(®page 129)

• Select “128kbps” or a faster rate to carry out the live transmission of JPEG images and the FTP periodic

image transmission simultaneously.

• When “Bandwidth control(bit rate)” is set low, taking a picture using the snap shot button may not

function depending on the use environment. In this case, select “QVGA” for “Image capture size” of

“JPEG” on the [JPEG/H.264] (or [JPEG/MPEG-4]) tab or set “Image quality setting” of “JPEG” lower.

[Easy IP Setup accommodate period]

Select “20min” or “Unlimited” to determine how long the network setting operation using the Panasonic “IP

Setting Software” can be allowed.

• 20min: The camera information display

and the network setting operation using the Panasonic “IP Setting

Software” are allowed for 20 minutes since the camera starts up.

• Unlimited: The camera information display and the network setting operation using the Panasonic “IP

Setting Software” are allowed without time limitation.

• Default: 20min

Note

• Refer to the network administrator for the addresses of each server.

• The port forwarding function changes a global IP address to a private IP address, and “Static IP

masquerade” and “Network Address Translation (NAT)” have this function. This function is to be set in

a router.

172 Operating Instructions

17 Configuring the network settings [Network]

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic WV-SC384 Seite 172

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic WV-SC384

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info