Bedienungsanleitung Panasonic WV-SC384 (Seite 205 von 244) (Englisch)

550986

205

Zoom out

Zoom in

Vorherige Seite

1/244

Nächste Seite

• 5 alphanumeric characters: 64bit

Example: 012yz

• 13 alphanumeric characters: 128bit

Example: 0123456uvwxyz

• Available number of characters: 10 or 26 characters (10 hex characters: 64bit/26 hex characters:

128bit)/5 or 13 characters (5 alphanumeric characters: 64bit/13 alphanumeric characters: 128bit)

• Available characters: 0 - 9, A - F or a - f (10 hex characters: 64bit/26 hex characters: 128bit)/

alphanumeric characters (5 alphanumeric characters: 64bit/13 alphanumeric characters: 128bit)

Entries are case sensitive. Spaces cannot be entered.

• Default: None (blank) and 13 alphanumeric characters: 128bit

[Network key]

A network key can be entered when the “WPA-PSK (TKIP)”, “WPA-PSK (AES)”, “WPA-PSK (TKIP/

AES)”, “WPA2-PSK (TKIP)”, “WPA2-PSK (AES)”, “WPA2-PSK (TKIP/AES)”, or “WPA/WPA2-mixedmode

PSK” method is selected for the encryption method. Select the same network key as the network key

configured to the connected wireless router.

Select the key length from the pull-down menu.

• 8 to 63 alphanumeric characters

• 64 hex characters

• Available number of characters: 8 - 63 characters

• Available characters: Alphanumeric characters

Entries are case sensitive. Spaces cannot be entered.

• Default: None (blank) and 8 to 63 alphanumeric characters

Note

• Depending on the connected wireless router, “WPA-PSK (TKIP)”, “WPA-PSK (AES)”, “WPA-PSK

(TKIP/AES)”, “WPA2-PSK (TKIP)”, “WPA2-PSK (AES)”, “WPA2-PSK (TKIP/AES)”, or “WPA/

WPA2-mixedmode PSK” methods may not be supported. In particular, if connections cannot be

made using mixed mode methods (WPA-PSK (TKIP/AES), WPA/WPA2-mixedmode PSK, etc.),

use a single mode method (WPA-PSK (TKIP), WPA-PSK (AES), etc.).

• The camera only supports open system authentication. If shared key authentication is configured

for the wireless router, change the authentication to auto or open system.

• It is recommended to select the “WPA2-PSK (AES)” or “WPA-PSK (AES)” enhanced encryption

methods for the wireless router's encryption settings.

4. Select “Not allow” for “External registration” in “Wi-Fi Protected Setup (WPS)”.

• If wireless connections are made with “Allow” selected, the wireless settings may be overwritten. Make

sure to select “Not allow”.

5. Click the [Set] button.

→ A message asking you if you want to restart the camera is displayed. Click [OK]. Wait about 2 minutes

until the camera restarts.

6. Turn off the camera by unplugging the AC adaptor from the power outlet.

7. Disconnect the LAN cable and turn on the camera by plugging the AC adaptor into the power outlet.

→ The camera starts up and starts the wireless connection.

Note

• Switch between wireless and wired connections with the following methods.

Wireless connections: To use wireless connections, turn on the camera without connecting the

LAN cable.

Wired connections: To use wired connections, connect the LAN cable and then turn on the

camera.

• When switching between wireless and wired connections, some wireless routers may have to be

restarted.

• Wired and wireless connections cannot be made to the camera at the same time.

Operating Instructions 205

18 Use the camera on a wireless LAN [Wireless] (SW174W only)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic WV-SC384 Seite 205

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic WV-SC384

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info