458602
47
Zoom out
Zoom in
Vorherige Seite
1/175
Nächste Seite
4 Operation
4-6 FrameSaver NP 110 Users Manual - Installation Guide 980-001-0240B
November
2000
Parameter
Setting
Upon successful login, the System View screen is displayed.
The System View screen presents an overview of the system and provides access to
configuration, test, and other status screens.
The System View screen is shown in Figure 4-2.
Fi
g
ure 4-2 S
y
stem View Screen
The System View screen fields are as follows:
Name: Device ID defined in the Unit Configuration.
Location: Physical location (city and state) of unit.
Contact: Contact person and phone number contained in the Unit Configuration.
Active S/W: Revision of the software currently operating the base unit (active flash
memory).
Idle S/W: Revision of the software currently in the offline flash memory. If the soft-
ware in the Idle Flash is not usable, the field indicates FlashFail.
NOTE: For both Active and Idle software, the first two-digit number indicates the
units feature level, the second indicates the major software revision, and the last
indicates minor revision level. Alpha characters at the end of the field indicate the
option type installed, if any (i=ISDN, x=DSX/Drop, ix=both).
S/N: Indicates the hardware serial number of the base unit.
System Test/Fault, Netw Port Fault, Device Fault and Active Test
All Test and/or Fault fields display: Blank or the highest priority Test or Fault
causing a disruption of the data path or other operational disruption of the unit.
Refer to the Appendix of this manual for a list and description of tests and faults.
*********************** FrameSaver NP 110 - System View ************************
Name: F@43802 Active S/W:03.01.30
Location: Fair Lawn, N.J. Idle:A S/W:03.01.20
Contact: J. Jones S/N:002431
System Test/Fault: User Ckt Status
Netw Port Fault: RTS/DTR/LL/Pwr: On /On /Off/On
Device Fault: Frame Fault:
Active Test:
Modem Status
Fault:
Connection:
Aux Port Status
Aux1 DTR: On
Aux2 DTR: On
DevConfig[DC] CsuConfig[CC] FrameConfig[FC] PvcConfig[PC] MonConfig[MC]
DevTest[DT] CsuStats[CS] FrameStats[FS] PvcStats[PS] MonStats[MS]
SnmpConfig[SC] TrapConfig[TC]
Help[?] Logout[LO] AutoUpdate[AU] TopStats[TS] HubConfig[HC]
>
47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Paradyne FrameSaver NP 110 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info