Bedienungsanleitung Parkside IAN 109803 PDBS 6.2 A1 (Seite 31 von 39) (Französisch)

745457

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

31 GB

Introduction

Introduction / General safety rules

Noise parameter per EN15744:2008

Noise level L

: 90.6 dB(A)

Sound power level L

: 101.6 dB(A)

pC, peak

= 110.9 dB(A)

Uncertainty K = 3 dB

Vibration parameters per EN 12096, ISO 28927-7

Hand-arm vibration level: 0.55 m / s

Uncertainty K: 1.5 m / s

General safety rules

Note: When used in the following text, the terms

„compressed air unit“ or „device“ refer to the com-

pressed air unit speciﬁed in these instructions for use.

Basic safety measures must be

followed when using compressed air devices to elim-

inate the risk of ﬁre, electric shock and personal in-

jury. Be sure to read and follow the notices within

these operating instructions prior to using the equip-

ment and store them in a safe location. The manufac-

turer assumes no liability for damages or personal

injury resulting from failure to follow these operating

instructions.

Persons (including children) who lack the knowl-

edge or experience to use the tool or whose

physical, sensory or intellectual capacities are

limited must never be allowed to use the tool

without supervision or instruction by a person

responsible for their safety.

Prevent children from playing with the device.

RISK OF INJURY! Before

performing maintenance tasks, disconnect the

compressed air supply.

EXPLOSION HAZARD! Never

use petrol or other ﬂammable liquids

to clean the air tool! Sparks could

ignite residual vapours inside the compressed air

unit resulting in the compressed air unit explod-

ing. Do not use the device in explosive environ-

ments with ﬂammable liquids, gasses or dust.

Never work on materials which are or could

potentially be highly ﬂammable or explosive.

Only use the equipment in areas of application

for which it was designed!

Do not overburden the device.

Never use hydrogen, oxygen, carb

dioxide or other bottled gasses to

power this tool as doing so may re-

sult in an explosion and thus may cause severe

injuries.

Maintain and clean the device regularly as in-

structed (see Chapter „Cleaning and storage“).

Check the device for damage before startup.

Always make sure that the device is in perfect

condition each time before use.

Always be attentive! Unexpected movement of

the device may cause hazards.

Avoid placing your body in an unnatural position.

Keep proper footing and balance at all times.

By doing this you will be in a better position to

control the compressed air unit in unforeseen

circumstances.

Do not use any device if its switch is defective.

A device that can no longer be switched on and

oﬀ is dangerous and must be repaired.

Store the device out of the reach of children when

it is not in use. Do not let anyone use the device

if he or she is not familiar with it or has not read

the instructions and advice. Compressed air units

are dangerous when they are used by inexperi-

enced people.

Maintain the device carefully. Check that mov-

ing device parts are working properly and move

freely. Check for any parts that are broken or

damaged enough to detrimentally aﬀect the

functioning of the device. Have damaged parts

repaired before using the device. Many accidents

have their origins in poorly maintained devices.

Switch the device oﬀ if you do not use it anymore.

Always wear personal protective

equipment and safety glasses. Wear-

ing personal protective equipment

such as dust mask, non-slip safety shoes, safety

helmet or ear protectors, depending on the type

of air tool and its application, reduces the risk

of injuries.

Check the connections and supply lines. All

maintenance devices, couplings and hoses must

be equipped to meet the pressure and air amounts

speciﬁed in the device speciﬁc values. Pressure

that is too low inﬂuences the functioning of the

device; pressure that is too high can cause dam-

age to property and personal injury.

109803_par_Druckluft-Blechschere PDBS 6.2A1_content_FR.indd 31 09.04.15 16:09

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 109803 PDBS 6.2 A1 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside IAN 109803 PDBS 6.2 A1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info