Bedienungsanleitung Parkside IAN 109803 PDBS 6.2 A1 (Seite 32 von 39) (Französisch)

745457

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

32 GB

General safety rules

Protect hoses from kinks, constrictions, solvents

and sharp edges. Keep hoses away from heat,

oil and rotating parts.

Make sure that the hose clamps are always

tightly fastened. If the hose clamps are not tightly

fastened or are damaged, the air could escape

uncontrollably.

eplace damaged hoses immediately. A damage

supply line may result in the air hose ﬂapping

about and may result in injuries.

If the power cable of the appliance is damaged,

it has to be replaced by the manufacturer or its

service department or a similarly qualiﬁed per-

son in order to avoid hazards.

Do not use the device when tired or under the

inﬂuence of drugs, alcohol or medications. One

moment of carelessness when using the device

may result in serious injuries.

Do not directly inhale the exhaust air. Keep eyes

away from exhaust air. Exhaust air from the air

tool may contain water, oil, metal particles or

contaminants from inside the compressor. This

may damage your health.

CAREFUL WHEN PUT-

TING THE TOOL DOWN! Always put down

the device so it does not come into contact with

the trigger. This could potentially result in acci-

dental activation of the device, which again

could result in hazards.

Only use suitable accessories. These may be pur-

chased from the manufacturer. Using non-OEM

accessories may result in hazards.

Only use ﬁltered and regulated compressed air.

Dust, caustic vapours and/or moisture may

damage the motor of the compressed air tool.

The hose must be designed for pres-

sures of at least 8.6 bar or 125 PSI,

but at least 150 % of the maximum

pressure generated in the system.

The tool and supply line must be

equipped with a hose coupling to

completely release pressure when

disconnecting the coupling hose.

DANGER! Avoid contact with live lines. This

device is not insulated against electric shock.

RISK OF INJURY! High

working pressures can give rise to recoil forces

hat under certain conditions can result in dange

from continuous loading.

If you are inexperienced in the use of this type

of device, you should seek training to learn how

to handle it safely.

DANGER OF STAB

WOUNDS! Do not treat an injection as a sim-

ple cut. A high pressure jet may inject toxins

into the body and cause serious injuries. If the

spray is injected into the skin, seek medical

help immediately.

Do not modify this device in any way without

the manufacturer‘s approval.

Only use the device with the speciﬁed pressure

(max. 6.2 bar).

Disconnect the compressed air unit from the air

supply after each use and when not in use.

Do not use the compressed air device if it leaks

or is in need of repair.

Never connect the compressed air device to an

air hose with pressure exceeding 6.2 bar.

Keep your working area clean and well lit. Un-

tidy or poorly lit working areas can result in ac-

cidents. Doing so will allow you better control

of the device, particularly under unforeseen cir-

cumstances.

Only have the device re-

paired by qualiﬁed specialist personnel using

OEM spare parts. This will maintain the safety

of the device.

Keep children and other persons away from the

device during use. Distractions can cause you

to lose control of the device.

Wear suitable clothing. Do not wear loose cloth-

ing or jewellery. Keep your hair, clothing and

gloves clear of moving parts. Loose clothing,

jewellery or long hair can become trapped in

moving parts.

Put down trigger and device in the event of un-

expected compressor failure.

If possible, use a condensate trap or drain the

hoses and pipes of condensate (water) regularly

before and during the use compressed air units.

ATTENTION! An undersized com-

pressed air system may minimise the

eﬃciency of your device.

For multiple hazards, read and understand the

safety instructions before installing, operating,

General safety rules

109803_par_Druckluft-Blechschere PDBS 6.2A1_content_FR.indd 32 09.04.15 16:09

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 109803 PDBS 6.2 A1 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside IAN 109803 PDBS 6.2 A1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info