745332
17
Zoom out
Zoom in
Vorherige Seite
1/122
Nächste Seite
17
IEGB
Cleaning and servicing
Pull the mains plug before any ad-
justments, maintenance or repair.
Have any work on the device
that is not described in this in-
struction guide performed by
a professional. Only use ori-
ginal parts. Allow the device
to cool off before any mainte-
nance or cleaning is underta-
ken. There is a risk of burning!
Always check the device before using it for
obvious deciencies such as loose, worn
or damaged parts, correct the positioning
of screws or other parts. Examine the
grinding disc in particular. Exchange the
damaged parts.
Cleaning
Do not use any cleaning agent or
solvent. Chemical substances can
etch the plastic parts of the device.
Never clean the device under run-
ning water.
Thoroughly clean the device after every
use.
Clean the ventilation openings and the
surface of the device with a soft brush
or cloth.
Servicing
Replacing carbon brushes
Switch off the appliance and dis-
connect the power supply. Let the
appliance cool down.
1. Loosen the screw ( 7) of the
maintenance cover (
6).
2. Remove the maintenance cover (
6).
3. Lift the compression spring (20)
out of the groove for the spring
(22) the carbon brush (21).
4. Remove the contact plug (25) of
the contact shoe (24).
5. Pull out the brush (21) from the
guide.
6. Insert a new carbon brush (21)
into the guide.
7. Place the connector (23) in a
bow in the groove for the com-
pression spring (22) past. Lead
the connector (23) through the
side opening of the leadership.
8. Slide the contact plug (25) on
the contact shoe (24).
9. Replace the compression spring
(20) on the nut of the compressi-
on spring (22) the carbon brush
(21).
10. Reattach the screw (
7)the
maintenance cover (
6)
11. Repeat the procedure 1 to 10
on the other side of the unit. The
carbon brushes are always in
pairs to share.
Storage
Store the appliance in a dry place well
out of reach of children.
Grinding discs must be dry and stored
upright and should never be stacked.
17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Parkside IAN 114254 PWS 125 B2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info