Bedienungsanleitung Parkside IAn 270853 PMGS 12 C3 (Seite 38 von 48) (Französisch)

745535

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

PMGS 12 C3

│

35 ■

Safety instructions for all applications

General safety instructions for grinding, sand-

paper sanding, working with wire brushes,

polishing, milling and abrasive cutting:

a) This power tool is intended for use as a grinder,

sandpaper sander, wire brush, polisher, milling

machine and abrasive cutting appliance.

Please follow all safety instructions, instruc-

tions, diagrams and data that you receive

with the appliance. If you do not observe the

following instructions, this can lead to electrical

shock, ﬁre and/or serious injuries.

b) Do not use any accessories that have not been

provided or recommended by the manufac-

turer for this power tool. Just because you can

attach the accessories to your power tool, does

not ensure they are safe to use.

c) The permissible speed of the accessory tool

used must be at least as high as the maximum

speed speciﬁed for the power tool. Accessories

that rotate faster than the permissible rate can

break and throw pieces into the air.

d) The external diameter and thickness of the

accessory tool used must comply with the

dimensions of the power tool. Incorrectly

dimensioned accessory tools cannot be suﬃ-

ciently shielded or controlled.

e) Grinding discs, sanding drums or other ac-

cessories must match the grinding spindle

or collet chuck of your power tool exactly.

Accessory tools which do not ﬁt precisely into

the take-up of the power tool will rotate un-

evenly, vibrate severely and can lead to a loss

of control.

f) Discs, grinding cylinders, cutting tools or other

accessories mounted on a mandrel must be

completely inserted in the collet or chuck.

Any "protrusion" or exposed parts of the

mandrel between the grinding tool and the

collet or chuck must be kept to a minimum.

If the mandrel is not suﬃciently tightened or the

grinding tool protrudes too far, the tool could

come loose and been thrown out at high speed.

g) Never use damaged accessory tools. Before

each use, check accessory tools such as grind-

ing discs for chips or cracks, sanding drums

for cracks, wearing or excessive wear and tear

and wire brushes for loose or broken wires.

If the power tool or the accessory tool in use

is dropped, check to see if it is damaged or

use an undamaged accessory tool. When you

have checked and inserted the accessory tool,

ensure that you and any other people in the

vicinity remain outside of the range of the

rotating accessory tool and allow the tool

to rotate at maximum speed for one minute.

Damaged accessory tools usually break during

this test period.

h) Wear personal protective equipment.

Depending on the application, ensure that

you use full face protection, eye protection

or goggles. If required, use a dust mask, ear

protectors, protective gloves or special apron

to protect you from grindings and material

particles. Eyes should be protected from ﬂying

debris that may be generated during certain

applications. Dust or ﬁlter masks must ﬁlter any

dust created by the application. If you are ex-

posed to loud noise for any length of time, you

may suﬀer hearing loss.

i) Ensure that other people remain at a safe dis-

tance to your workspace. Anyone who enters

the workspace must wear personal protective

equipment. Fragments of the workpiece or

broken accessory tools can ﬂy oﬀ and cause

injury – even outside the immediate working

area.

j) Hold the power tool by the insulated gripping

surfaces, when performing an operation

where the accessory tool may contact hidden

wiring or its own cord. Contact with a live cable

can also make metal parts of the appliance live

and could result in an electric shock.

k) Always hold the power tool ﬁrmly. When

running up to full speed, the torque of the

motor can cause the power tool to twist.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAn 270853 PMGS 12 C3 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside IAn 270853 PMGS 12 C3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info