Bedienungsanleitung Parkside IAN 272950 PFS 710 C2 (Seite 8 von 44) (Deutsch, Englisch, Holländisch, Französisch)

745342

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

PFS 710 C2

Appliance-speciﬁc safety instructions

To avoid the risk of injury or ﬁre as well as

health risks:

■ Hold the power tool by the insulated grip-

ping surfaces when carrying out work

during which the power tool may contact

hidden power cables or the device’s mains

lead. Contact with a live cable can also make

metal parts of the appliance live and could result

in an electric shock.

■ Wear a dust mask!

■ When working outdoors, connect the appliance

via a fault current circuit breaker with a maximum

tripping current of 30mA.

■ Secure the workpiece. Use clamps/vice to hold

the workpiece ﬁrmly in place. This is safer than

simply holding it in your hand.

■ Do not rest your hands next to or in front of the

appliance and the area being worked as there

is a risk of injury if you slip.

■ In case of danger, remove the power plug from

the socket immediately.

■ Always route the power cord towards the rear,

away from the appliance.

■ RISK OF FIRE DUE TO FLYING SPARKS!

If you are sawing metal, sparks will occur.

Ensure that nobody is put at risk and that no

combustible materials are located in the imme-

diate vicinity of your working space.

WARNING! TOXIC DUSTS!

■ Working with the tool can produce harmful/

toxic dusts which represent a health hazard

for the person operating the appliance and

for anyone else in the vicinity.

Wear safety goggles and a protective dust

mask!

■ Materials containing asbestos may not be pro-

cessed. Asbestos is a known carcinogen.

■ When sawing construction materials, make sure

to follow the statutory regulations and recom-

mendations from the manufacturers.

■ Never work on moistened materials or damp

surfaces.

■ Always switch the appliance on before applying

it to the material.

CAUTION!

■ Avoid contact with solid objects if the appli-

ance is running – risk of kickback!

■ The footplate

must always make contact with

the workpiece when the appliance is running.

■ Always switch the appliance oﬀ and allow it to

coast before putting it down.

■ Only use sharp saw blades which are in perfect

condition. Replace cracked, bent or blunt saw

blades immediately.

■ The appliance must always be kept clean, dry

and free from oil or grease.

Original accessories/auxiliary

equipment

■ Use only the accessories and additional

equipment that are speciﬁed in the operat-

ing instructions and are compatible with

the appliance. Using attachments or acces-

sory tools other than those recommended in

the operating instructions can lead to a risk of

injury.

Information on saw blades

You can use any saw blade provided it is ﬁtted with a

suitable mount - 1/2“ (12.7 mm) universal shaft. Op-

timised saw blades in diﬀerent lengths are available

from a retail store to suit every intended purpose.

NOTE

► TPI = teeth per inch = the number of teeth per

2.54 cm

Wood saw blade

Dimensions: 152 x1.25 mm, 6 TPI

Best suitability: for sawing construction wood, chip-

board, panels and plywood, and also plunge cuts.

Bimetal saw blade

Dimensions: 152 mm, 18 TPI

Best suitability: for sawing sheet metal, proﬁles and

pipes – ﬂexible and break-resistant.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 272950 PFS 710 C2 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info