Bedienungsanleitung Parkside IAN 273278 PTS 500 A1 (Seite 9 von 74) (Deutsch, Englisch, Holländisch, Dänisch, Französisch)

745341

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

PTS 500 A1

c) If you want to restart a saw that is still in the

workpiece, centre the saw blade in the cut

and check to ensure that the teeth are not

caught anywhere in the workpiece. If the saw

blade catches it can jump out of the workpiece

or cause a kickback when the saw is restarted.

d) Support large panels or boards to reduce the

risk of the saw blade jamming and causing

a kickback. Large panels tend to bend under

their own weight. Panels must be supported on

both sides, both the vicinity of the saw cut and

also at the edge.

e) Do not use blunt or damaged saw blades.

Saw blades with blunt or misaligned teeth may

cause excessive friction as the saw cut is too

narrow, and can cause a sawblade jam and

kickback.

f) Before sawing, ensure that the fastenings

for the cut depth and cut angle settings are

tightened. If the settings change while sawing,

the saw blade might jam and cause a kickback.

g) Be particularly careful when sawing in existing

walls or other obscured areas. The inserted

saw blade could get caught on hidden objects

and cause a kickback.

Speciﬁc safety instructions for this

saw

Function of the lower blade guard:

a) Before every use, check to ensure that the

blade guard closes properly. Do not use the

saw if the lower blade guard does not move

freely and does not close immediately. Never

jam or fasten the blade guard; this would

leave the saw blade unprotected. If the saw

accidentally falls to the ﬂoor, the blade guard

might bend. Ensure that the blade guard moves

freely and does not touch the saw blade or

other parts at any cutting angles or depths.

b) Check the condition and function of the spring

for the blade guard. Have the saw serviced

before using it if the blade guard and spring

are not working properly. Damaged parts,

sticky deposits or accumulations of chippings

can cause the lower blade guard to operate

slowly.

c) When making a "plunge cut" that is not at

right angles, secure the base plate of the saw

to prevent any lateral movement. Lateral

movement can cause the saw blade to jam, thus

causing a kickback.

d) Do not leave the saw on the work bench or

ﬂoor if the blade guard is not fully covering

the saw blade. An unprotected, coasting saw

blade will move the saw in the opposite direc-

tion to the cutting direction saw anything in its

path. Always take into account that the saw

blade takes some time to stop spinning.

Supplementary notes

■ Do not use any grinding discs.

■ Use only saw blades with diameters corres-

ponding to the label on the saw.

■ When sawing wood or other materials that cre-

ate dusts that are hazardous to health, always

connect the appliance to a suitable, certiﬁed

suction appliance.

■ Wear a dust mask when sawing wood.

■ Only use recommended saw blades.

■ Always wear ear protectors.

■ Do not allow the teeth of the saw blade to

overheat.

■ When sawing plastic, avoid melting the plastic.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 273278 PTS 500 A1 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info