Bedienungsanleitung Parkside IAN 273278 PTS 500 A1 (Seite 11 von 74) (Deutsch, Englisch, Holländisch, Dänisch, Französisch)

745341

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

PTS 500 A1

k) Ensure that other people remain at a safe dis-

tance to your workspace. Anyone who enters

the workspace must wear personal protective

equipment. Fragments of the workpiece or

broken accessory tools can ﬂy oﬀ and cause

injury – even outside the immediate working

area.

l) Hold the power tool only by the insulated

handles while you are carrying out work

during which the accessory tool may come

into contact with concealed power cables

or the tool’s own power cord. Contact with

a live cable may also cause metal parts of the

appliance to become live and may result in an

electric shock.

m) Keep the power cord away from any rotating

accessories. If you lose control of the appli-

ance, the cord may get cut or caught and your

hand or arm could get caught in the rotating

accessory tool.

n) Never put the power tool down until the ac-

cessory tool has come to a complete standstill.

The rotating accessory tool can come into contact

with the surface and cause you to lose control of

the power tool.

o) Do not leave the power tool running whilst

carrying it. Accidental contact between your

clothing and the rotating accessory tool could

cause your clothing to get caught and the access-

ory tool to penetrate a part of your body.

p) Clean the ventilation slits of your power tool

regularly. The engine fan draws dust into the

housing and a strong accumulation of metal

dust can cause electrical hazards.

q) Do not use the power tool in the vicinity of

ﬂammable materials. Sparks can ignite such

materials.

r) Do not use any accessory tools which require

liquid coolant. The use of water or other liquid

coolants may lead to electric shock.

Further safety instructions for

abrasive cutting applications

Kickback and corresponding safety

instructions

Kickback is the sudden reaction caused when a

rotating grinding disc catches or jams. Catching or

jamming causes the rotating accessory tool to stop

abruptly. If this happens, an uncontrolled power

tool turns rapidly against the direction of rotation

of the accessory tool caught in the blockage.

If, for example, a grinding disc catches or jams,

the edge of the grinding disc that is projecting into

the workpiece can get caught and break oﬀ the

grinding disc or cause a kickback. The grinding

disc can then ﬂy in the direction of the operator

or away from him, depending on the direction of

rotation of the disc at the blockage. This can also

break grinding discs.

A kickback is caused by incorrect use or misuse

of the power tool. This can be avoided by taking

proper precautions as given below.

a) Hold the power tool ﬁrmly in both hands and

position your body and arms so they can ab-

sorb the force of a kickback. Always use the

additional handle, if available, so you have

maximum control over the kickback force

or reaction torques at full speed. By taking

adequate precautions, the operator can stay in

control of the kickback and reaction torques.

b) Never hold your hand close to rotating ac-

cessory tools. The accessory tool could hit your

hand in the event of a kickback.

c) Avoid the area in front of and behind the

rotating cutting disc. The kickback will force

the power tool in the opposite direction to the

direction of rotation of the grinding disc at the

blockage.

d) Take special care when working around

corners, sharp edges, etc. Avoid allowing

the accessory tool to bounce back from the

workpiece, or jam. The rotating accessory tool

is more likely to jam in corners or sharp edges

or if it bounces. This can cause a loss of control

or kickback.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 273278 PTS 500 A1 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info