Bedienungsanleitung Parkside IAN 273460 PTK 2000 B2 (Seite 42 von 204) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

745555

Zoom out

Zoom in

Vorherige Seite

1/204

Nächste Seite

GB IE

reduction in the performance of the

machine, as well as a reduction in the

cutting accuracy.

• Avoid switching the machine on by

accident: when inserting the plug into

the socket, the power button must not

be pressed.

• Use the tool which is recommended

in this manual. This will ensure the

optimal performance of your saw.

• Keep your hands away from the

working area when the machine is in

operation.

• Before you carry out any adjustments

or servicing work, turn the device off

and remove the mains plug.

5. Electrical Connection

The installed electric motor is

connected ready for operation.

The connection complies with the

relevant VDE and DIN regulations.

The customer‘s network connection



comply with these regulations.

• The product meets the requirements

of EN 61000-3-11 and is subject to

special connection conditions. This

means that its use at freely selectable

connection points is not permitted.

• If the network conditions are unfa-

vourable, the device may result in



• The maximum permitted mains

impedance at the electrical connec-

tion point of 0.107 ohm must not be

exceeded.

• As the user, you must ensure – in

consultation with your electricity sup-

ply company if necessary – that the

continuous current carrying capacity

of the network at the connection point



connection of the product.

Important Instructions

If the motor is overloaded, it switches

itself off automatically. After cooling down

(times vary), the motor can be switched on

again.

Faulty Electrical

Connection Cable

Insulation damage often occurs to electrical

connection cables.

The causes of this may be as follows:

• Pressure points if connection cables

are routed through windows or door

gaps.

• Kinks caused by improper attachment

or routing of the connection cable.

• Cut surfaces caused by vehicles dri-

ving over the connection cable.

• Insulation damage caused by tearing

out of the wall socket.

• Cracks resulting from the insulation

becoming old.

Such faulty electrical connections must not

be used and may endanger life due to the

damage to the insulation.

Electrical connection cables should be

checked regularly for damage. Ensure that

during such checks, the connection cable is

not connected to the mains.

Electrical connection cables must comply

with the relevant VDE and DIN regulati-

ons. Only use connection cables with the

marking H05VV-F.

It is stipulated by law that the type of con-

nection cable must be printed on it.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 273460 PTK 2000 B2 Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info