Bedienungsanleitung Parkside IAN 275389 PWS 125 C3 (Seite 10 von 90) (Deutsch, Englisch, Holländisch, Dänisch)

745528

Zoom out

Zoom in

Vorherige Seite

1/90

Nächste Seite

GB IE NI

in the attachment tool must t

the mounting diameter of the

ange. Attachment tools which cannot

be precisely attached to the electric tool

turn unevenly, vibrate very strongly and

can ultimately lead to a loss of control.

• Never use damaged attachment

tools. Check attachment tools

such as grinding discs for chip-

ping or cracks, grinding plates

for cracks, wear or strong abra-

sion and wire brushes for loose

or broken wires before using

them. If the electric tool or the

attachment tool falls off, check

whether it is damaged or, use

an undamaged attachment tool.

If you have checked the attach-

ment tool and attached it, keep

yourself and any nearby persons

beyond the level of the rotating

attachment tool and allow the de-

vice to run for 1 min. at the high-

est rotational speed. Damaged tools

usually break during this test period.

• Wear personal safety equip-

ment. Depending on the appli-

cation, use full face shields, eye

protection or safety goggles. In

so far as it is appropriate, wear

dust masks, ear protection,

gloves or special aprons which

keep small grinding and materi-

al particles away from you. Eyes

should be protected from the foreign

matter which can be caused to y du-

ring the various applications. Dust or

breathing masks should lter the dust

that is created during operation. If you

are exposed to loud noise for a long

time, you may suffer hearing loss.

• Ensure that other people are at

a safe distance to your working

area. Anyone who enters the

working area should wear per-

sonal protective equipment. Bro-

ken bits from the piece being worked or

broken attachment tools can y away

and cause injuries even beyond the di-

rect working area.

• Hold the electric tool only by the

insulated gripping surfaces when

performing work in which the

cutting tool may come into contact

with hidden wiring or its own

cord. Contact with a live wire can also

cause a charge in metal parts of the

device and result in an electric shock.

• Keep the cord away from the ro-

tating attachment tool. If you lose

control of the device, the power cord

can become separated or caught and

your hand or arm may be pulled into

the rotating attachment tool.

• Never put the electric tool down

before the attachment tool has

come to a full stop. The rotating at-

tachment tool can come into contact with

the surface upon which it is set, whereby

you could lose control of the electric tool.

• Never allow the electric tool to

run while you are carrying it.

Your clothing may accidentally come

into contact with the rotating attachment

tool and get caught and the attachment

tool could drill into your body.

• Clean the ventilation slots of

your electric tool routinely. The

motor air pulls dust into the housing

and, should too much metallic dust coll-

ect, could cause electrical hazards.

• Never use the electric tool near

ammable material. Sparks could

ignite this material.

• Do not use attachment tools

which require liquid coolant.

Using water or another liquid coolant

could lead to electrical shock.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 275389 PWS 125 C3 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside IAN 275389 PWS 125 C3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info