Bedienungsanleitung Parkside IAN 275681 PDBS 6.2 A1 (Seite 34 von 41) (Französisch)

745541

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

35 GB

General safety rules General safety rules

repairing, maintaining, changing accessories on,

or working near the nibbler or shear. Failure to

do so can result in serious bodily injury.

Only qualiﬁed and trained operators should in-

stall, adjust or use the nibbler or shear.

Do not modify this nibbler or shear. Modiﬁcations

can reduce the eﬀectiveness of safety measures

and increase the risks to the operator.

Do not discard the safety instructions; give them

to the operator.

Do not use the nibbler or shear if it has been

damaged.

Tools shall be inspected periodically to verify

that the ratings and markings required by this

part of ISO 11148 are legibly marked on the

tool. If necessary, the user must contact the

manufacturer for replacement labels.

Projectile hazards

Disconnect the nibbler or shear from the energy

source when changing inserted tool or acces-

sories.

Be aware that failure of the workpiece or acces-

sories, or even of the inserted tool itself can

generate high-velocity projectiles.

Always wear impact-resistant eye protection dur-

ing operation of the tool. The grade of protection

required should be assessed for each use.

Ensure that the workpiece is securely ﬁxed.

Ensure that metal cuttings are directed so as

not to cause a hazard.

Operating hazards

Use of nibblers and shears can expose the oper-

ator’s hands to hazards including cuts, abrasions

and heat:

– avoid contact with the cutter whenever the nib-

bler or shear is connected to the power supply;

– cutting with nibblers and shears creates sharp

edges.

Wear relevant protective equipment such as gloves.

Operators and maintenance personnel shall be

physically able to handle the bulk, weight and

power of the tool.

Hold the tool correctly; be ready to counteract

normal or sudden movements and have both

hands available.

Maintain a balanced body position and secure

footing.

Release the start-and-stop device in the case of

an interruption of the energy supply.

Use only lubricants recommended by the manu-

facturer.

Avoid direct contact with the inserted tool during

and after use as it can become hot.

Sharp tools should always be used.

Avoid unsuitable postures as it is likely for these

positions not to allow counteracting of normal or

unexpected movement of the tool.

Unexpected tool movement or breakage of cut-

ters can cause injuries.

Warnings shall be given against the risk of explo-

sion or ﬁre due to the material being processed.

Repetitive motions hazards

When using a nibbler or shear to perform work-

related activities, the operator can experience

discomfort in the hands, arms, shoulders, neck

or other parts of the body.

While using a nibbler or shear, the operator

should adopt a comfortable posture whilst main-

taining secure footing and avoiding awkward

or oﬀ-balance postures. The operator should

change posture during extended tasks; this can

help avoid discomfort and fatigue.

If the operator experiences symptoms such as

persistent or recurring discomfort, pain, throbb

ing,

aching, tingling, numbness, burning sensations

or stiﬀness, these warning signs should not be

ignored. The operator should consult a quali-

tied health professional.

Accessory hazards

Disconnect the nibbler or shear from the energy

supply before ﬁtting or changing the inserted

tool or accessory.

Use only sizes and types of accessories and

consumables that are recommended by the

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 275681 PDBS 6.2 A1 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside IAN 275681 PDBS 6.2 A1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info