Bedienungsanleitung Parkside IAN 275681 PDBS 6.2 A1 (Seite 38 von 41) (Französisch)

745541

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

39 GB

Lubricating the cutting shears

Turn the tool over so the compressed air connec-

tion is facing up, and add a few drops of oil for

compressed air tools or SAE 10–20 motor oil

to the compressed air connection of the com-

pressed air unit.

Activate the trigger

to allow the oil to dis-

tribute better.

Hold a rag or absorbent paper towel in front

of the air discharge opening and operate the

device in idle for a few seconds.

ATTENTION! Remove the compressed air connec-

tion before performing maintenance!

Excess oil will be blown out. K

eep

persons or objects away from the discharge.

Storing the cutting shears

Store the compressed air tool in dry rooms,

protected from the eﬀects of weather.

Ensure moisture does not enter the compressed

air unit.

Information about warranty

and service processing

Creative Marketing Consulting GmbH

warranty

Dear customer,

the warranty for this device is 3 years from the date

of purchase. In the event of product defects, you

have

legal rights against the retailer of this product. Your

statutory rights are not limited in any way by our

warranty detailed below.

Warranty terms

The warranty period begins on the date of purchase.

Please retain the original receipt safely. This document

is required as your proof of purchase.

Should this device show any fault in materials or

manufacture within three years from date of purchase,

it will be repaired or replaced – at our choice – by

us free of charge. This warranty is conditional on the

defective device and the proof of purchase (receipt)

being presented within the three year warranty pe-

riod, and that there is a brief written description of

the nature of the defect and of the date it arose.

If the defect is covered by our warranty, we will re-

turn the repaired device or replacement thereof. A

repair or exchange of the device does not extend a

new warranty period.

Extent of warranty

The appliance has been manufactured to strict qua-

lity guidelines and meticulously examined before

delivery.

The warranty applies to faults in material or manuf-

acture. This warranty does not apply to product

parts subject to normal wear and tear and which

can therefore be considered as wear items, or to

damage to fragile parts, e.g. switches, storage bat-

teries or glass parts.

This warranty becomes void if the device has been

damaged or improperly used or maintained. All in-

structions provided in the operating instructions must

be followed strictly to constitute proper use of the

product. Purposes and practices which the opera-

ting instructions warn of or advise against must be

avoided without fail.

This product is intended for private, non-commercial

use only. Any incorrect or improper use of the de

vice,

use of force and changes not performed by our

authorized service branch will void the warranty.

Processing of warranty claims

Please follow the instructions below to ensure quick

processing of your claim:

When inquiring about your product please have

your receipt and product number (e.g. IAN) ready

as your proof of purchase.

Cleaning and storage / Information about warranty and service processingStart-up / After initial use / Cleaning and storage

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 275681 PDBS 6.2 A1 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside IAN 275681 PDBS 6.2 A1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info