Bedienungsanleitung Parkside IAN 275685 PDMH 4500 A3 (Seite 8 von 72) (Deutsch, Englisch, Holländisch, Dänisch, Französisch)

745549

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

9 GB/IE

General safety instructions for air tools / General safety rules

Disconnect the compressed air unit from the air

supply after each use and when not in use.

Do not use the compressed air unit if it is not air

tight or in need of repair.

Never connect the compressed air unit to an air

hose with pressure exceeding 6.3 bar.

Keep your working area clean and well lit. Untidy

or poorly lit working areas can result in accidents.

Doing so will allow you better control of the

device, particularly under unforeseen circum-

stances.

Only have the equipment

repaired by qualiﬁed specialist personnel using

OEM spare parts. This will maintain the safety

of the device.

Keep children and other persons away from the

device during use. Distractions can cause you

to lose control of the device.

Wear suitable clothing. Do not wear loose cloth-

ing or jewellery. Keep your hair, clothing and

gloves clear of moving parts. Loose clothing,

jewellery or long hair can become trapped in

moving parts.

Put down trigger and device in the event of un-

expected compressor failure.

If possible, use a condensate trap or regularly

drain the hoses and pipes of condensate (water)

before and whilst using compressed air units.

ATTENTION! An undersized com-

pressed air system may minimise the

eﬃciency of your device.

General safety rules

For multiple hazards, read and understand the

safety instructions before installing, operating,

repairing, maintaining, changing accessories

on, or working near the non-rotary percussive

power tool. Failure to do so can result in serious

bodily injury.

Only qualiﬁed and trained operators should

install, adjust or use the non-rotary percussive

power tool.

Do not modify this non-rotary percussive power

tool. Modiﬁcations can reduce the

eﬀectiveness of safety measures and increase

the risks to the operator.

Do not discard the safety instructions; give them

to the operator.

Do not use the non-rotary percussive power tool

if it has been damaged.

Tools shall be inspected periodically to verify

the ratings and markings required by this part

of ISO 11148 are legibly marked on the tool.

The employer / user shall contact the manufac-

turer to obtain replacement marking labels when

necessary.

Never modify the product. Modiﬁcations reduce

the eﬀectiveness of safety measures and increase

the risk of injuries.

Never use a damaged device.

Use and maintain the device as recommended

in the instructions for use to minimise dust or gas-

ses, noise and vibration.

Do not use the device in idle to prevent the chisel

from ejecting uncontrolled.

Use the consumables and the inserted tool as

speciﬁed in the instructions for use to minimise

dust or gasses, noise and vibration.

Regularly maintain the device to verify all re-

quired rated values and markings such as rated

speed or rated air pressure, required by ISO

11148, are legible on the device. If necessary,

the user must contact the manufacturer for re-

placement labels for markings.

Risks due to projected parts

Disconnect the non-rotary percussive power tool

from the energy source when changing inserted

tool or accessories.

Be aware that failure of the workpiece, or ac-

cessories, or even of the inserted tool itself can

generate highvelocity projectiles.

Always wear impact-resistant eye protection dur-

ing the operation of the non-rotary percussive

power tool. The grade of protection required

should be assessed for each use.

For overhead work, wear a safety helmet.

The risks to others should also be assessed at

this time.

General safety instructions for air tools

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 275685 PDMH 4500 A3 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info