Bedienungsanleitung Parkside IAN 276009 PDWS 125 A1 (Seite 11 von 60) (Deutsch, Englisch, Holländisch, Französisch)

745542

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

PDWS 125 A1

■ 8

│

Special safety instructions for

grinding and abrasive cutting

■ Use only the grinding accessories approved for

your compressed air tool and the appropriate

protective cover for these grinding tools. Grind-

ing tools which are not designed for the com-

pressed air tool can not be suﬃciently shielded

and are unsafe.

■ Cranked grinding discs must be ﬁtted so that

their grinding surfaces do not protrude above

the level of the protective cover edge. An im-

properly mounted grinding disc which protrudes

beyond the edge of the protective cover cannot

be suﬃciently screened.

■ The protective cover must be securely ﬁxed

to the compressed air tool and adjusted to

ensure maximum safety so that the smallest

possible amount of the grinding tool is ex-

posed to the operator. The protective cover is

designed to protect the operator from fragments

and accidental contact with the grinding tool.

■ Grinding tools should only be used for the

recommended applications. For example:

Never grind with the side surface of a cut-

ting disc. Cutting discs are designed to remove

material with the edge of the disc. Any lateral

application of force on these grinding tools can

lead to breakage.

■ Always use an undamaged clamping ﬂange

of the correct size and shape for the grind-

ing disc you have selected. Suitable ﬂanges

support the grinding disc and reduce the risk of

disc breakage. Flanges for cutting discs can be

diﬀerent to ﬂanges for other grinding discs.

■ Do not use worn grinding discs from larger

compressed air tools. Grinding discs for larger

compressed air tools are not designed for the

higher rotational speeds of smaller compressed

air tools and can break.

Additional special safety instructions

for abrasive cutting

■ Avoid cutting disc jams or excessive contact

pressure. Do not make any excessively deep

cuts. Overloading the cutting disc increases the

stress and likelihood of tilting or jamming and

thus the possibility of kickback or breakage of

the grinding tool.

■ Avoid the area in front of and behind the

rotating cutting disc. When you move the cut-

ting disc away from yourself in the workpiece it

is possible, in the event of a kickback, that the

compressed air tool along with the rotating disc

might be thrown out directly towards you.

■ If the cutting disc jams or you stop working,

switch the tool oﬀ and hold it steady until the

disc has come to a complete standstill. Never

attempt to pull a rotating cutting disc out of a

cut. This could lead to kickback. Identify and

remove the cause of the jam.

■ Do not switch the compressed air tool back

on while it is in the workpiece. Allow the cut-

ting disc to reach its full speed before you

carefully continue the cut. Otherwise, the disc

can jam, jump out of the workpiece or cause

kickback.

■ Support panels or large workpieces to re-

duce the risk of the cutting disc jamming and

causing a kickback. Large workpieces can

bend under their own weight. The workpiece

must be supported on both sides of the disc:

both in the vicinity of the cutting disc and also

at the edge.

■ Be particularly careful when making "pocket

cuts" into existing walls or other obscured ar-

eas. The inserted cutting disc may cut into gas

or water pipes, electrical wiring or other objects

that can cause kickback.

Kickback and corresponding safety

instructions

■ Kickback is a sudden reaction caused when a

rotating accessory tool catches or jams.

■ Catching or jamming causes the rotating acces-

sory tool to stop abruptly.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 276009 PDWS 125 A1 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info