Bedienungsanleitung Parkside IAN 279872 PFBS 12 A1 (Seite 9 von 66) (Deutsch, Englisch, Holländisch, Französisch)

745925

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

PFBS 12 A1

■ 6

│

If the mandrel is not suﬃciently tightened or the

grinding tool protrudes too far, the tool could

come loose and been thrown out at high speed.

g) Never use damaged accessory tools. Before

each use, check accessory tools such as

grinding discs for chips or cracks, sanding

drums for cracks, wearing or excessive wear

and tear and wire brushes for loose or broken

wires. If the power tool or the accessory

tool in use is dropped, check to see if it is

damaged or use an undamaged accessory

tool. When you have checked and inserted

the accessory tool, ensure that you and any

other people in the vicinity remain outside of

the range of the rotating accessory tool and

allow the tool to rotate at maximum speed for

one minute. Damaged accessory tools usually

break during this test period.

h) Wear personal protective equipment.

Depending on the application, ensure that

you use full face protection, eye protection

or goggles. If required, use a dust mask, ear

protectors, protective gloves or special apron

to protect you from grindings and material

particles. Protected your eyes from ﬂying debris

that may be created during certain applications.

Dust or ﬁlter masks must be used to ﬁlter any

dust created by the application. If you are ex-

posed to loud noise for any length of time, you

may suﬀer hearing loss.

i) Ensure that other people remain at a safe

distance to your workspace. Anyone who

enters the workspace must wear personal

protective equipment. Fragments of the work-

piece or broken accessory tools can ﬂy oﬀ

and cause injury – even outside the immediate

working area.

j) Hold the power tool only by the insulated

gripping surfaces when performing an oper-

ation where the accessory tool may contact

hidden wiring or its own cord. Contact with

a live cable can also make metal parts of the

appliance live and could result in an electric

shock.

k) Always hold the power tool ﬁrmly. When

running up to full speed, the torque of the

motor can cause the power tool to twist.

l) If possible, use clamps to hold the workpiece

in position. Never hold a small workpiece

in one hand and the power tool in the other

while you are using it. By clamping small work-

pieces, you keep both hands free for better

control of the power tool. When cutting round

workpieces such as dowels, rods or pipes, be

aware that these can roll away and this can

cause the tool to jam and be thrown towards

you.

m) Hold the power cord away from any rotating

accessories. If you lose control of the appli-

ance, the cord may get cut or caught and your

hand or arm could get caught in the rotating

accessory tool.

n) Never put the power tool down until the

accessory tool has come to a complete stand-

still. The rotating accessory tool can come into

contact with the surface and cause you to lose

control of the power tool.

o) When changing accessory tools or changing

settings, tighten the collet nut, the chuck or

other ﬁxing elements tightly. Loose ﬁxing ele-

ments can shift unexpectedly and lead to loss of

control; unﬁxed, rotating components will ﬂy oﬀ

violently.

p) Do not leave the power tool running whilst

carrying it. Accidental contact between your

clothing and the rotating accessory tool could

lead to physical injury.

q) Clean the ventilation slits of your power tool

regularly. The engine fan draws dust into the

housing and a strong accumulation of metal

dust can cause electrical hazards.

r) Do not use the power tool in the vicinity of

ﬂammable materials. Sparks can ignite such

materials.

s) Do not use any accessory tools which require

liquid coolant. The use of water or other liquid

coolants may lead to electric shock.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 279872 PFBS 12 A1 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info