Bedienungsanleitung Parkside IAN 280250 PWS 125 D3 (Seite 9 von 114) (Deutsch, Englisch, Holländisch, Dänisch, Französisch)

746143

Zoom out

Zoom in

Vorherige Seite

1/114

Nächste Seite

NIIEGB

of moving parts, breakage of

parts and any other condition

that may affect the power tool’s

operation. If damaged, have the

power tool repaired before use.

Many accidents are caused by poorly

maintained power tools.

• Keep cutting tools sharp and

clean. Properly maintained cutting

tools with sharp cutting edges are less

Iikely to bind and are easier to control.

• Use the power tool, accessories

and tool bits etc. in accordance

with these instructions, taking

into account the working con-

ditions and the work to be per-

formed. Use of the power tool for

operations different from those intended

could result in a hazardous situation.

Service:

• Have your power tool serviced

by a qualied repair person

using only identical replacement

parts. This will ensure that the safety

of the power tool is maintained.

Safety instructions for all

applications

Common safety instructions for

grinding, sanding, working with

wire brushes polishing and cutting

grinders:

• This electric tool is to be used as

a grinder, sander, wire brush,

polisher and cutting grinder.

Follow all safety instructions,

directives, illustrations and facts

which you receive with the de-

vice. If you do not follow these instruc-

tions, an electrical shock, re and/or

serious injury may occur.

• Do not use any accessories that

are not specically intended and

recommended for this electric

tool by the manufacturer. Simply

because an accessory can be attached

to your electric tool does not guarantee

safe operation.

• The allowable rotation speed

of the attachment tools must be

at least as high as the highest

rotation speed indicated on the

electric tool. Accessories that run fas-

ter than the allowable speed can break

and y apart.

• The outside diameter and thick-

ness of the attachment tool must

correspond to the dimensions

indicated for your electric tool.

Attachment tools which are wrongly

dimensioned cannot be sufciently

shielded or controlled.

• Attachment tools with threaded

attachment must t the threa-

ding of the grinding spindle

exactly. For attachment tools

which are mounted through a

ange, the diameter of the hole

in the attachment tool must t

the mounting diameter of the

ange. Attachment tools which cannot

be precisely attached to the electric tool

turn unevenly, vibrate very strongly and

can ultimately lead to a loss of control.

• Never use damaged attachment

tools. Check attachment tools

such as grinding discs for chip-

ping or cracks, grinding plates

for cracks, wear or strong abra-

sion and wire brushes for loose

or broken wires before using

them. If the electric tool or the

attachment tool falls off, check

whether it is damaged or, use

an undamaged attachment tool.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 280250 PWS 125 D3 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info