Bedienungsanleitung Parkside IAN 280250 PWS 125 D3 (Seite 11 von 114) (Deutsch, Englisch, Holländisch, Dänisch, Französisch)

746143

Zoom out

Zoom in

Vorherige Seite

1/114

Nächste Seite

1 1

NIIEGB

• Only use grinding discs where the in-

dicated rotational speed is at least as

high as what has been specied on the

name plate of the device.

• Carry out a visual inspection of the grin-

ding disc before use. Do not use any dama-

ged or deformed grinding discs. Replace

any damaged or worn grinding discs.

• Make sure that the sparks produced by

grinding do not present a danger, e.g.

reach people or ignite ammable subs-

tances.

•

Always wear safety goggles, safety gloves,

respiratory protection and ear protection

when grinding, brushing and cutting.

• Never keep the ngers between the

grinding disc and spark protection or in

close proximity to the protective hoods.

There is a risk of crushing.

• The rotating parts of the device cannot

be covered due to functional reasons.

Therefore, proceed cautiously and hold

the workpiece rmly in order to avoid

slipping which could cause your hands to

come into contact with the grinding disc.

• The workpiece gets hot during grin-

ding. Do not touch the machined area,

allow it to cool down. There is a risk of

burning. Do not use coolants or the like.

• If you are tired or have consumed al-

cohol or tablets, do not work with the

device. Always have a break on time.

• Switch the device off and remove the

mains plug

- to loosen a blocked insertion tool,

- if the connection line is damaged or

entangled,

- in case of unusual sounds.

RESIDUAL RISKS

Even if properly operating and handling

this electric tool, some residual risks will

remain. Due to its construction and build,

this electric tool may present the following

hazards:

a) Lung damage if suitable respiratory pro-

tection is not worn.

b) Hearing damage if suitable ear protec-

tion is not worn.

c) Damage to health due to

- touching the area of the grinding tool

which is not covered;

- ejection of parts of workpieces or

damaged grinding discs.

d) Health injuries which result from swin-

ging hand and arm, in the event that

the device is used over a longer period

of time or is not used and maintained

properly.

Warning! During operation, this

electric tool generates an electro-

magnetic eld which, under certain

circumstances, may impair the func-

tionality of active or passive medical

implants. To reduce the risk of seri-

ous or lethal injuries, we recommend

that persons with medical implants

consult their doctor and the manu-

facturer of their medical implant

before operating the machine.

Additional safety instructions

for all applications

Kickback and corresponding

precautions

Kickback is the sudden reaction from a

chopping or blocked grinder attachment

such as a grinding disc, grinding plate,

wire brush etc. Chopping or blocking leads

to sudden stopping of the rotating attach-

ment. This causes an uncontrolled electric

tool to accelerate in a direction counter to

the rotational direction of the attachment

tool. If, for example, a grinding disc cuts

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 280250 PWS 125 D3 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info