Bedienungsanleitung Parkside IAN 282494 PWSA 20 Li A1 (Seite 29 von 134) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

746159

Zoom out

Zoom in

Vorherige Seite

1/134

Nächste Seite

PWSA 20-Li A1

■ 24 │ GB

│

6. Service

a) Have your power tool serviced by a qualiﬁed

repair person using only identical replace-

ment parts. This will ensure that the safety of

the power tool is maintained.

Safety instructions for all applications

Special safety instructions for grinding and

abrasive cutting:

a) This power tool is to be used as a grinder and

abrasive cutting appliance. Please follow all

safety instructions, instructions, diagrams and

data that you receive with the appliance. If

you do not observe the following instructions,

this can lead to an electrical shock, ﬁre and/or

serious injuries.

b) This power tool is not suitable for sandpaper

sanding, working with a steel brush or bur-

nishing. Using the power tool for applications

for which it is not designed can lead to hazards

and injuries.

c) Do not use any accessories that have not

been speciﬁcally provided or recommended

by the manufacturer for this power tool. Just

because you can attach the accessories to your

power tool, does not ensure they are safe to use.

d) The maximum speed of the accessory tool

used must be at least as high as the maximum

speed speciﬁed for the power tool. Accessories

that rotate faster than the permissible rate can

break and throw pieces into the air.

e) The external diameter and thickness of the

accessory tool used must comply with the di-

mensions of the power tool. Incorrectly dimen-

sioned accessory tools cannot be suﬃciently

shielded or controlled.

f) Attachment tools with a thread insert must

match the thread of the grinding spindle ex-

actly. For attachment tools that are mounted

using a ﬂange, the diameter of the hole on

the attachment tool must correspond to the

width of the ﬁtment on the ﬂange. Accessory

tools that cannot be ﬁrmly ﬁtted to the power

tool rotate unevenly, vibrate severely and can

lead to a loss of control.

g) Never use damaged accessory tools. Check

accessory tools such as grinding discs before

each use for chips or cracks, grinding plates

for cracks, wearing or excessive wear and

tear and wire brushes for loose or broken

wires. If the power tool or the accessory

tool in use is dropped, check to see if it is

damaged or use an undamaged accessory

tool. When you have checked and inserted

the accessory tool, ensure that you and any

other persons in the vicinity remain outside

the plane of the rotating accessory tool and

allow the tool to rotate at maximum speed

for one minute. Damaged accessories usually

break during the test period.

h) Wear personal protective equipment.

Depending on the application, ensure that

you use full face protection, eye protection

or goggles. Use a dust mask, hearing protec-

tion, protective gloves or special apron that

protect you from grindings and material par-

ticles as required. Protect your eyes from ﬂying

debris that may be created during certain ap-

plications. Dust or ﬁlter masks must be used to

ﬁlter any dust created by the application. If you

are exposed to loud noise for any length

of time, you may suﬀer hearing loss.

i) Ensure that other people remain at a safe dis-

tance to your workspace. Anyone who enters

the workspace must wear personal protective

equipment.

Fragments of the workpiece or broken acces-

sory tools can ﬂy oﬀ and cause injury – even

outside the immediate working area.

j) Hold the power tool only by the insulated

handles when you are carrying out work

in which the accessory tool may come into

contact with concealed power cables. Contact

with a live cable may also cause metal parts of

the appliance to become live and may result in

an electric shock.

k) Keep the power cord away from any rotating

accessories. If you lose control of the appli-

ance, the cord may get caught or cut and your

hand or arm could get caught in the rotating

accessory tool.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 282494 PWSA 20 Li A1 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info