Bedienungsanleitung Parkside IAN 285202 PDT 40 D3 (Seite 18 von 80) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

746434

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

PDT 40 D3

■ 14

│

WARNING!

Staple gun safety

WARNING!

► Read all safety warnings and all instruc-

tions. Failure to follow the warnings and

instructions may result in electric shock, ﬁre

and/or serious injury.

Save all warnings and instructions for future

reference.

■ Before starting work, check the correct functioning

of the safety and triggering mechanisms as well

as ﬁrm seating of all screws and bolts.

■ Do not carry out any unauthorised modiﬁcations

to the staple gun.

■ Do not disassemble or block any parts of the

staple gun, such as the trigger lock.

■ Do not carry out any "emergency repairs" with

unsuitable materials.

■ Maintain the staple gun regularly and properly

according to the manufacturer's guidelines.

■ Avoid any weakening of or damage to the

appliance, e.g. through

– impacts or engraving,

– modiﬁcations not authorised by the manu-

facturer,

– working along stencils made of hard me-

tals, e.g. steel,

– dropping onto or sliding across the ﬂoor,

– using it as a hammer,

– all types of violence.

■ Fasten the staple gun ﬁrmly on supports, e.g.

on a workbench.

The mounts used must be designed so that they

protect the staple gun from damage, twisting or

slipping.

Work safety

■ Never aim an operationally ready staple gun

directly at yourself or others.

■ While working, hold the staple gun so that your

head and body cannot be injured by a possible

kickback caused by a fault in the energy supply

or hard objects in the workpiece.

■ Never trigger the staple gun into the air.

This will prevent risks caused by ﬂying nails or

staples and excessive strain on the appliance.

■ Before transport, disconnect the staple gun from

the compressed air source, especially if you are

using ladders or working in an unusual position.

■ In the workplace, carry the appliance only

by the handle and not with your ﬁnger on the

trigger.

■ Pay attention to the working conditions. Nails/

staples can break through thin workpieces or

slide oﬀ and injure people when working on the

corners or edges of workpieces.

■ Use suitable protection equipment to protect

yourself, e.g. hearing and eye protection.

Wearing protective equipment such as a dust

mask, non-skid safety shoes, hard hat, or hearing

protection used for appropriate conditions will

reduce personal injuries depending on the type

and use of the appliance.

Supplementary safety instructions

for compressed air staplers

WARNING! RISK OF INJURY!

► Never exceed the maximum permissible

operating pressure of 8 bar.

Use a pressure reducer to adjust the working

pressure.

► Never use oxygen or other ﬂammable gases

as an energy source.

■ Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 285202 PDT 40 D3 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info