Bedienungsanleitung Parkside IAN 285766 PTBS 520 A1 (Seite 18 von 74) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

746421

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

PTBS 520 A1

GB│IE │ 15 ■

b) Do not use the power tool if the switch does

not turn it on and oﬀ. Any power tool that can-

not be controlled with the switch is dangerous

and must be repaired.

c) Disconnect the plug from the power source

and/or the battery pack from the power tool

before making any adjustments, changing

accessories or storing power tools. Such

preventive safety measures reduce the risk of

starting the power tool accidentally.

d) Store idle power tools out of the reach of

children and do not allow persons unfamiliar

with the power tool or these instructions to

operate the power tool. Power tools are dan-

gerous in the hands of untrained users.

e) Maintain power tools. Check for misalignment

or binding of moving parts, breakage of parts

and any other condition that may aﬀect the

power tool’s operation. If damaged, have the

power tool repaired before use. Many acci-

dents are caused by poorly maintained power

tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to

control.

g) Use the power tool, accessories and tool

bits etc. in accordance with these instructions,

taking into account the working conditions

and the work to be performed. Use of the

power tool for operations diﬀerent from those

intended could result in a hazardous situation.

5. Service

a) Have your power tool serviced by a qualiﬁed

repair person using only identical replacement

parts. This will ensure that the safety of the

power tool is maintained.

Device-speciﬁc safety instructions for

magazine attachments/screwdrivers

■ Hold the appliance by the insulated handles

when you are carrying out work during which

the screws may come into contact with con-

cealed power cables or the tool’s own power

cable. If a screw comes into contact with a live

wire, this may make exposed metal parts of the

power tool live and could give the operator an

electric shock.

■ Disconnect the plug from the power source

and/or the battery pack from the power tool

before making any adjustments or changing

accessories. Unintentional starting of power

tools is the cause of many accidents.

■ Hold the power tool ﬁrmly. High reaction

moments can occur for brief periods while

tightening and loosening screws.

■ Secure the workpiece! A workpiece securely

held by a clamping device or vice is much safer

than one held in your hand.

■ Wait until the power tool has come to a stand-

still before putting it down. The tool can jam,

this leading to loss of control of the power tool.

■ Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves

away from moving parts. Loose clothes, jewel-

lery or long hair can be caught in moving parts.

■ Never point the power tool at yourself or

other people in the vicinity.

■ Never reach into the magazine attachment or

the screwing location during work. There is a

risk of personal injury from sharp-edged screws

or due to crushing.

■ Only use suitable screw belts as described

in the technical data. Using other screws can

damage the magazine attachment.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 285766 PTBS 520 A1 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info