Bedienungsanleitung Parkside IAN 298505 PDSP 1000 D4 (Seite 15 von 64) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

748055

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

15 GB/IE

Technical data

Operating pressure: 6.3 bar

Air consumption: 320 l / min

Container volume: 0.9 l

Air quality required: puriﬁed and oil-free

Setting values

for work: set operating pressure on

the pressure regulator or ﬁl-

ter pressure gauge max.

6.3 bar.

Noise emission value:

Measured sound value determined according to

EN 1265. The A-rated noise level of the air tool is

typically:

Sound pressure level: L

= 94 dB(A)

Uncertainty: K

= 3 dB(A)

Sound power level: L

= 105 dB(A)

Uncertainty: K

= 3 dB(A)

Wear ear protection!

Vibration emission value:

Total vibration value determined

according to EN ISO 20643: ah < 2.5 m / s

The vibration level speciﬁed

in these instructions was measured in accordance

with an EN ISO 20643 standardised measurement

process and can be used to compare tools. The

vibration emission value speciﬁed can also serve as

a preliminary assessment of the exposure. Diﬀerent

uses of the air tool give rise to diﬀerent vibration levels

and in many cases they may exceed the values

given in these instructions. It is easy to underestimate

the vibration load if the air tool is used regularly in

particular circumstances. If you wish to make an

accurate assessment of the vibration loads experi-

enced during a particular period of work, you should

also take into account the periods when the product

is switched oﬀ or is running but is not actually in

use. This can result in a much lower vibration load

over the whole of the period of working.

Note: If you wish to make an accurate assessment

of the vibration loads experienced during a particular

period of working, you should also take into account

the intervening periods of time when the product is

switched oﬀ or is running but is not actually in use.

This can result in a much lower vibration load over

the whole of the period of working.

General safety

information

Please read all safety informa-

tion and instructions. Failure to observe the safety

information and instructions may result in electric

shock, ﬁre, and/or serous injuries.

KEEP ALL SAFETY INFORMATION AND

INSTRUCTIONS FOR FUTURE REFERENCE.

Workplace safety

a) Keep your work area clean and well lit.

Untidy or poorly lit work areas can result in acci-

dents.

b) Do not use the product in explosive

environments with ﬂammable liquids,

gasses or dust. The product can create

sparks which can ignite dusts or fumes.

c) Keep children and other people away

from the product during use. You could

lose control of the product if you are distracted.

Tool-speciﬁc safety information

for the compressed air

sandblaster

Check the product for damage before use.

Refrain from using the product if it is defective.

Keep children and other people away from the

product during use. You could lose control of

the product if you are distracted.

RISK OF INJURY! IMPROPER USE!

Never point the product at people and/or

animals.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 298505 PDSP 1000 D4 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info