748074
28
Zoom out
Zoom in
Vorherige Seite
1/140
Nächste Seite
28
GB IE
ter. Hold the additional handle
or the motor housing with your
other hand. When holding the milling
cutter with both hands, they cannot be
injured by the cutter.
Never mill over metal objects, nails
or screws. The milling cutter can be dam-
aged and lead to increased vibrations.
Use suitable detectors in order to
nd hidden supply lines or ask
the local utility company. Contact
with electrical cables can lead to electric
shock and re, contact with a gas pipe
can result in an explosion. Damage to
a water pipe can lead to property dam-
aged and electric shock.
Do not use any blunt or damaged
tools. Blunt or damaged tools can
cause uncontrollable situations.
Hold the power tool tightly with
both hands while working and en-
sure a secure footing. The power tool
is guided more securely with both hands.
Wait until the power tool has
stopped before placing it down.
The attachment tools can jam and lead
to a loss of control over the power tool.
Avoid contact with the tool or
the workpiece immediately after
processing. The parts may be hot and
cause burn injuries.
Use only milling cutters which have the
correct shank diameter and are suitable
for the speed of the power tool.
Residual risks
Even if properly operating and handling
this electric tool, some residual risks will
remain. Due to its construction and build,
this electric tool may present the following
hazards:
a) Injuries caused by moving parts;
b) Ear damage if working without ear
protection;
c) Lung damage, if suitable respiratory
protection is not worn;
d) Eye injuries if no suitable eye protec-
tion is worn.
e) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
Warning! During operation, this
electric tool generates an electro-
magnetic eld which, under certain
circumstances, may impair the func-
tionality of active or passive medical
implants. To reduce the risk of seri-
ous or lethal injuries, we recommend
that persons with medical implants
consult their doctor and the manu-
facturer of their medical implant
before operating the machine.
Initial operation
Pull out the power plug before car-
rying out any work on the equip-
ment. There is a risk of electrocution
or of injury from moving parts.
Before you turn on the machine, you must
- insert the desired cutter,
- connect the dust suction,
- adjust the cutting depth,
- mount the parallel stop if necessary,
- clamp in the workpiece.
Inserting/changing cutters
To insert and replace cutters, wear
protective gloves to prevent cuts
and burns.
28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Parkside IAN 304379 POF 1200 C2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info