Bedienungsanleitung Parkside IAN 304520 PTBM 500 E5 (Seite 28 von 144) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Polnisch)

748958

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

GB IE

- Before further use of the power tool,

safety devices or slightly damaged

parts must be carefully examined in

respect of their proper and intended

function.

- Check that the moving parts are wor-

king properly and are not jammed

or whether parts are damaged. All



satisfy all conditions to ensure the

proper operation of the power tool.

- Damaged safety equipment and

parts must be repaired properly or

replaced by an authorised specialist

workshop unless otherwise indicated

in the instructions.

- Damaged switches must be replaced

at a customer service workshop.

- Do not use power tools if the switch

cannot be turned on and off.

• CAUTION! The use of other bits and

other accessories can result in a risk of

personal injury.

• Have your power tool be re-



- This power tool complies with the

relevant safety regulations. Repairs



electrician, using original spare parts;

otherwise accidents involving the user

may result.

Service:

• Have your power tool repaired



only with original spare parts.

This will ensure that the power tool re-

mains safe.

Safety Instructions for Box

Column Drills

• Never make the warning labels

on the power tool illegible.

• Attach the power tool to a solid,

 If the

power tool can slip or wobble, the bit

may not be guided smoothly and safely.

• Keep the work area clean ex-

cept for the workpiece to be

machined. Sharp-edged drilling chips

and objects can cause injury. Material

mixtures are particularly dangerous.

Light metal dust can burn or explode.

• Set the correct speed before

starting work. The speed must

be appropriate for the drill dia-

meter and the material to be

drilled. At an incorrectly set speed the

bit may get jammed in the workpiece.

• Only when the device is turned on

should the bit be moved against

the work piece. Otherwise there is a

danger that the bit will get jammed in the

workpiece and the workpiece will rota-

te with the bit. This can lead to injuries.

• Do not put your hands in the

area of the drill while the power

tool is running. Upon contact with

the bit is a risk of injury.

• Never remove drilling chips from

the drilling area while the pow-

er tool is running. Always put the

drive mechanism in the standby positi-



• Do not remove accumulated drill

chips with your bare hands.

There is a risk of injury due to hot and

sharp metal shavings in particular.

• Break up long drilling chips by

interrupting the drilling opera-

tion with a short backward ro-

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 304520 PTBM 500 E5 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info