Bedienungsanleitung Parkside IAN 307044 PKS 2200 A1 (Seite 38 von 196) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

749294

Zoom out

Zoom in

Vorherige Seite

1/196

Nächste Seite

GB IE

Keep cord away from heat, oil,

sharp edges or moving parts.

Damaged or entangled cords increase

the risk of electric shock.

• When operating a power tool

outdoors, use an extension cord

suitable for outdoor use. Use of a

cord suitable for outdoor use reduces

the risk of electric shock.

• If operating a power tool in a

damp location is unavoidable,

use a residual current device

(RCD) protected supply. Use of an

RCD reduces the risk of electric shock.

Connect the appliance to a power

socket with a residual current circuit

breaker of rated residual current no

more than 30 mA.

• Use only approved power cable of

type H05RN-F, which are no more than

75 m in length and intended for use

outdoors. The conductor cross section

of the cord must be at least 2.5 mm2.

Always fully unroll a cable drum before

use. Check the power cord for damage.

Personal safety

CAUTION: In this way you avoid

accidents and injuries:

• Stay alert, watch what you are

doing and use common sense

when operating a power tool.

Do not use a power tool while

-

ence of drugs, alcohol or medi-

cation. A moment of inattention white

operating power tools may result in

serious personal injury.

• Wear personal protective equip-

ment and always wear safety

glasses. Wearing personal protective

equipment such as nonslip safety boots,



Iiquids, gases or dust. Power tools

create sparks which may ignite the dust

or fumes.

• Keep children and bystanders

away while operating a power

tool. Distractions can cause you to lose

control.

Electrical safety

CAUTION! The following states

how to avoid accidents and injuries

due to electric shock:

• Power tool plugs must match the

outlet. Never modify the plug in

any way. Do not use any adapt-

er plugs with earthed (grounded)

power tools.

matching outlets will reduce risk of elec-

tric shock

• Avoid body contact with

earthed or grounded surfaces,

such as pipes, radiators, ranges

and refrigerators. There is an in-

creased risk of electric shock if your

body is earthed or grounded.

• Do not expose power tools to

rain or wet conditions. Water

entering a power tool will increase the

risk of electric shock.

• If the supply cord of this power tool

is damaged, it must be replaced by

a specially prepared cord available

through the service organization.

• If it is necessary to replace the connec-

tion cable, we recommend that this be

performed by the manufacturer or an

authorised representative (e.g. autho-

rised workshop, customer service, etc.).

• Do not abuse the cord. Never

use the cord for carrying, pulling

or unplugging the power tool.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 307044 PKS 2200 A1 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info