Bedienungsanleitung Parkside IAN 307044 PKS 2200 A1 (Seite 40 von 196) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

749294

Zoom out

Zoom in

Vorherige Seite

1/196

Nächste Seite

GB IE



Ensure that the saw chain does not

come into contact with the ground.

After completing the cut, wait for the

chainsaw to come to a standstill before

removing the chainsaw. Always switch

off the chainsaw motor before moving

from one tree to another.

• Dirt, stones, loose bark, nails, staples

and wire must be removed from the tree.

Service

• Have your power tool serviced

-

ing only identical replacement

parts. This will ensure that the safety

of the power tool is maintained.

• Follow the maintenance, control and ser-

vice instructions in this manual carefully.

Damaged safety equipment and parts

must be repaired or replaced profes-

sionally by our service centre, unless

otherwise indicated in the operating

instructions.

Chain saw safety warnings:

• Keep all parts of the body

away from the saw chain when

the chain saw is operating. Be-

fore you start the chain saw,

make sure the saw chain is not

contacting anything. A moment of

inattention white operating chain saws

may cause entanglement of your cloth-

ing or body with the saw chain.

• Always hold the chain saw with

your right hand on the rear

handle and your left hand on

the front handle. Holding the chain

-

tion increases the risk of personal in-

jury and should never be done.

• Hold the power tool only on the

insulated handle surfaces, as the

saw chain may come into contact

with concealed power cables.

Contact between the saw chain and a

live cable may render metallic compo-

nents live and result in an electric shock

• Wear safety glasses and ear

protection. Other protective

equipment for the head, hands,

legs and feet is compulsory. Ad-

equate protective clothing will reduce

-

cidentaI contact with the saw chain.

• Do not operate a chain saw in a

tree. Operation of a chain saw white up

in a tree may result in personal in jury.

• Always keep proper footing

and operate the chain saw only



and level surface. Slippery or un-

stable surfaces such as ladders may

cause a loss of balance or control of

the chain saw.

• When cutting a branch that is

under tension be alert for spring

back. When the tension in the wood



may strike the operator and/or throw

the chain saw out of control.

• Use extreme caution when cut-

ting brush and saplings. The slen-

der material may catch the saw chain

and be whipped toward you or pull

you off balance.

• Carry the chain saw by the

front handle with the chain saw

switched off and away from

your body. When transporting

or storing the chain saw always

 Proper

handling of the chain saw will reduce

the Iikelihood of accidentaI contact

with the moving saw chain.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 307044 PKS 2200 A1 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info