Bedienungsanleitung Parkside IAN 309645 PDSSE 450 C3 (Seite 19 von 86) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

749295

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

IEGB

4) USE AND TREATMENT

OF POWER TOOLS

a) Do not force the power tool. Use

the correct power tool for your

application. The correct power tool

will do the job better and safer at the

rate for which it was designed.

b) Do not use the power tool if the

switch does not turn it on and

off.

controlled with the switch is dangerous

and must be repaired.

c) Remove the plug from the wall

socket and/or remove the

rechargeable battery before

you adjust the tool’s settings,

change accessories or put away

the tool. -



tool.

d) Store idle power tools out of the

reach of children and do not al-

low persons unfamiliar with the

power tool or these instructions

to operate the power tool. 

tools are dangerous in the hands of

untrained users.

e) Look after power tools and

accessories carefully. Check

for misalignment or binding

of moving parts, breakage of

parts and any other condition

that may affect the power tool’s

operation.



-

tained power tools.

f) Keep cutting tools sharp and

clean. 

tools with sharp cutting edges are less



g) Use the power tool, accessories

and tool bits etc. in accordance

with these instructions, taking

into account the working condi-

tions and the work to be per-

formed. Use of the power tool for op-

erations different from those intended



h) Hold the device by the insulated

gripping surfaces when per-

forming work in which the cut-

ting tool may come into contact

with hidden wiring or its own

cord. Contact with a live wire can also

cause a charge in metal parts of the

device and result in an electric shock.

h) Keep handles dry, clean and

free from oil and grease.

handles and handle surfaces do not

permit safe operation and control over



5) SERVICE

Have your power tool serviced

-

ing only identical replacement

parts.

of the power tool is maintained.

Further safety directions

a) Hold the power tool by the

insulated handle grips when

performing work in which the

screw may come into contact

with hidden wiring or its own

power cord.

come into contact with a live electrical

cable, metal parts of the appliance

could also become live and cause an

electric shock.

b) Keep hands away from rotating

parts. Wait until the power tool

has stopped before placing it

down.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 309645 PDSSE 450 C3 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info