749295
20
Zoom out
Zoom in
Vorherige Seite
1/86
Nächste Seite
GB IE
20
c) Avoid contact with the tool insert
or the component part immedi-
ately after processing. The parts

d) Immediately switch off the
power tool if the tool insert is
blocked due to overloading or
tilting of the component part.
The loss of control can result in injuries.
 
a mains socket via a residual-current
circuit breaker (RCD) with a rated leak-
age current of not more than 30 mA.
f) If the tool’s mains power cable
is damaged, it must be replaced
with a particular power lead,
which may be obtained from the
manufacturer or their customer
service representative.
Residual risks

electric tool, some residual risks will remain.
Due to its construction and build, this elec-

 
surfaces.
b) Ear damage if working without ear
protection.
 

operating the appliance for longer pe-
riods of time or if the unit is not held or

Warning! During operation, this
electric tool generates an electro-



medical implants. To reduce the risk
of serious or lethal injuries, we
recommend that persons with medi-
cal implants consult their doctor
and the manufacturer of their medi-
cal implant before operating the
machine.
Operation
Inserting/replacing the tool
 
the tool holder (1).
2. To remove it, pull the bit off from
the tool holder (1).
Set the direction of rotation
You can toggle between right and left rota-

switch (5).

performed in standstill mode!
1. Clockwise direction: 
directional switch (5) to the right
up to the stop.
2. Counter-clockwise direction: 
the directional switch (5) to the
left up to the stop.


Switching on/off

voltage matches the voltage rat-

plate.
Connect the machine to the power

20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Parkside IAN 309645 PDSSE 450 C3 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info