Bedienungsanleitung Parkside IAN 310850 PISG 120 A1 (Seite 34 von 76) (Deutsch, Englisch, Holländisch, Französisch)

749299

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

34 GB/IE

Maintenance and Cleaning / Information about warranty and service ...

Before performing maintenance work or

repairs on the welding tool, disconnect

the power cable

from the power outlet

to ensure the tool is safely isolated from

the power supply.

Clean the exterior of the welding tool

regularly. Use compressed air, cotton

waste or a brush to remove dirt and dust.

Note: The following kinds of maintenance

work must be performed only by suita-

bly-qualified personnel.

Current regulators, earthing equipment,

internal cables, the blowpipe coupler

and adjusting screw should be main-

tained regularly. Tighten loose screws

and replace rusty screws (M4 × 10

replacement screws are available from

your local DIY store.).

Regularly check the leakage resistance of

the welding tool. Use suitable measuring

instruments for this purpose.

In the event of a defect or if components

need to be replaced, please contact the

correspond ing professional.

zInformation about

warranty and service

processing

Creative Marketing & Consulting

GmbH warranty

Dear customer, the warranty for this device

is 3 years from the date of purchase. In the

event of product defects, you have legal

rights against the retailer of this product.

Your statutory rights are not limited in any

way by our warranty detailed below.

zWarranty terms

The warranty period begins on the date of

purchase. Please retain the original receipt

safely. This document is required as your

proof of purchase.

Should this device show any fault in ma-

terials or manufacture within three years

from date of purchase, it will be repaired

or replaced - at our choice - by us free of

charge. This warranty is conditional on the

defective device and the receipt of purchase

(store receipt) being presented within the

three year warranty period, and that there

is a brief written description of the nature of

the defect and of the date it arose.

If the defect is covered by our warranty,

we will return the repaired equipment or

replacement thereof. A repair or exchange

of the equipment does not extend a new

warranty period.

zExtent of warranty

The appliance has been manufactured to

strict quality guidelines and meticulously

examined before delivery.

The warranty applies to faults in material or

manufacture. This warranty does not apply

to product parts subject to normal wear and

tear and which can therefore be considered

as wear items, or to damage to fragile parts,

e.g. switches, storage batteries or glass

parts.

This warranty becomes void if the device

has been damaged or improperly used or

maintained. All instructions provided in the

operating instructions must be followed strict-

ly to constitute proper use of the product.

Purposes and practices which the operating

instructions warn of or advise against must

be avoided without fail.

This product is intended for private, non-com-

mercial use only. Any incorrect or improper

use of the device, use of force and changes

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 310850 PISG 120 A1 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info