Bedienungsanleitung Parkside IAN 310860 PFBS 160 B2 (Seite 26 von 130) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

749296

Zoom out

Zoom in

Vorherige Seite

1/130

Nächste Seite

PFBS 160 B2 GB│IE │ 23 ■

4. Power tool use and care

a) Do not force the power tool. Use the correct

power tool for your application. The correct

power tool will do the job better and safer at

the rate for which it was designed.

b) Do not use the power tool if the switch does

not turn it on and oﬀ. Any power tool that can-

not be controlled with the switch is dangerous

and must be repaired.

c) Disconnect the plug from the power source

and/or the battery pack from the power tool

before making any adjustments, changing

accessories, or storing power tools. Such

preventive safety measures reduce the risk of

starting the power tool accidentally.

d) Store idle power tools out of the reach of

children and do not allow persons unfamiliar

with the power tool or these instructions to

operate the power tool. Power tools are

dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalign-

ment or binding of moving parts, breakage of

parts and any other condition that may aﬀect

the power tool's operation. If damaged, have

the power tool repaired before use. Many ac-

cidents are caused by poorly maintained power

tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to

control.

g) Use the power tool, accessories and tool bits

etc. in accordance with these instructions,

taking into account the working conditions

and the work to be performed. Use of the

power tool for operations diﬀerent from those

intended could result in a hazardous situation.

5. Service

a) Have your power tool serviced by a qualiﬁed

repair person using only identical replace-

ment parts. This will ensure that the safety of

the power tool is maintained.

WARNING!

Always wear safety googles

Safety instructions for all applica-

tions

General safety instructions for grinding, sand-

paper sanding, working with wire brushes,

polishing, milling and abrasive cutting:

a) This power tool is intended for use as a grinder,

sandpaper sander, wire brush, polisher,

milling machine and abrasive cutting appli-

ance. Please follow all safety instructions,

directives, diagrams and data that you re-

ceive with the appliance. If you do not observe

the following instructions, this can lead to an

electrical shock, ﬁre and/or serious injuries.

b) Do not use any accessories that have not

been provided or recommended for this

power tool by the manufacturer. Just because

you can attach the accessories to your power

tool, does not guarantee they are safe to use.

c) The permissible speed of the attachment part

must be at least as high as the maximum speed

speciﬁed for the power tool. Accessories that

rotate faster than the permissible rate can break

and throw pieces into the air.

d) The external diameter and thickness of the

attachment part used must comply with the

dimensions of the power tool. Incorrectly

dimensioned accessory tools cannot be suf-

ﬁciently shielded or controlled.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 310860 PFBS 160 B2 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info