Bedienungsanleitung Parkside IAN 315808 PHS 9500 A1 (Seite 27 von 100) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

749330

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

23GB/IE

• Never work

- with stretched arms

- on hardly accessible places

- too far bent forward

• Never work with the hedge trimmer above shoulder height.

• Never get in contact with the running cutting device with me-

tallic fences or the ground.

• Stop the engine and pull the spark plug connector:

- when you notice changes in the device’s behaviour,

- to remove jammed material,

- to check the cutting device after it had contact with stones,

nails or other hard objects,

- to eliminate faults,

- for work breaks,

- before leaving the hedge trimmer.

• Do not place a hot hedge trimmer in dry grass or onto inﬂam-

mable objects.

• Before starting your work make sure that:

- no other persons or animals stay within the working area,

- you can always step back without any barriers,

- your standing area is free from foreign objects, brush-

wood and branches,

- you have always a secure standing position.

If persons who have blood circulation problems are too often

exposed to vibrations damages to the nervous system or to

blood vessels may occur.

7.2 You can reduce vibrations:

• by thick and warm working gloves,

• shorter working time (have longer breaks).

See a doctor if your ﬁngers swell, you don’t feel well or your

ﬁngers become numb.

7.3 Working with the hedge trimmer

Hold the hedge trimmer with both hands on a safe distance

from the body.

• The maximal diameter to cut depends on the wood’s type,

age, moisture and hardness.

• Therefore cut very thick branches using branch shears to

your desired length before trimming the hedge.

• Due to its double sided knives the hedge trimmer can be

guided forward and backward or by oscillating movements

from one to another side.

• At ﬁrst cut the sides of the hedge and then the upper edge.

• Cut the hedge from the bottom up.

• Cut the hedge in trapezium shape. This prevents the lower

hedge area from growing bare due to insuﬃcient light.

• Stretch a guide over the complete length of the hedge when

you want to shorten the upper edge of the hedge evenly.

• Trim in several passes if you have to cut down a large portion

of the hedge.

7.4 Best time for hedge trimming:

• Leaved hedge: June and October

• Conifer hedge: April and August

• Quickly growing hedge: from May and then every 6 weeks

Pay attention to breeding birds in the hedge. If so, put oﬀ

hedge trimming or leave this area out.

At any case pay attention to all safety instructions.

7.5 Behaviour in the event of malfunctions or accidents

In case of malfunctions or accidents, immediately press the on/

oﬀ switch (6) to turn oﬀ the hedge trimmer.

7.6 First aid

For potentially occurring accidents, the First Aid kit, according

to DIN 13164, should always be handy at the work place.

Material taken from the First Aid kit must be replaced imme-

diately.

When you are requesting help, give the following information:

• Location of accident

• Type of accident

• Number of injured people

• Type of injuries

• Who is reporting

8. Technical data

Engine Type ..................................two-stroke engine - air cooled

Capacity cm3 ........................................................................ 25,4

Engine power kW ...................................................................0,7

Idle speed n0/min-1 ...............................................3000 +/- 300

Max. Engine speed min-1 ................................................. 10500

Fuel tank capacity cm3 .......................................................... 600

Mixing ratio (fuel/two-stroke oil) ......................................... 40:1

Cutting length mm ................................................................ 600

Max. cutting thickness mm .......................................................27

Dimension L/B/H mm ......................................1190/244/235

Sword length mm .................................................................. 780

Weight without accessories kg approx. ................................6,0

Subject to technical changes!

Sound

Information concerning noise emission measured according to

relevant standards:

Sound pressure LpA .............................................94,0 dB(A)

Uncertainty KpA .............................................................3 dB

Sound power LWA .............................................105,1 dB(A)

Uncertainty KWA ......................................................2,11 dB

Wear ear-muﬀs.

The impact of noise can cause damage to hearing.

Vibration

Vibration (rear handle) Ahv ................................5,975 m/s2

Uncertainty Khv ....................................................... 1,5 m/s2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 315808 PHS 9500 A1 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info