Bedienungsanleitung Parkside IAN 55728 PTS 480 A1 (Seite 27 von 34) (Deutsch, Englisch, Holländisch)

745199

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

27 GB

Introduction Introduction / General safety advice for electrical power tools

cedure according to EN 60745 and can be used

for the comparison of appliances. The vibration

emission value speciﬁed can also serve as a prelim-

inary assessment of the exposure.

Diﬀerent uses of the device give rise to diﬀerent vi-

bration levels and in many cases they may exceed

the values given in these instructions. It is easy to

underestimate the vibration load if the electrical

power tool is used regularly in particular circum-

stances.

Note: If you wish to make an accurate assessment

of the vibration loads experienced during a particu-

lar period of work, you should also take into account

the intervening periods of time when the device is

switched oﬀ or is running but is not actually in use.

This can result in a much lower vibration load over

the whole of the work period.

General safety advice for

electrical power tools

Please read all safety

information and instructions. Failure to ob-

serve the safety information and instructions can

result in electric shock, fire and / or serious injury.

For future reference keep all the safety

advice and instructions in a safe place.

The term “electrical tool” used in the safety advice

refers to electrical tools powered by mains electric-

ity (by means of a mains lead) and electrical tools

mains lead).

1. Workplace safety

a) Keep your working area clean and

well lit. Untidy or poorly lit working areas

can lead to accidents.

b) Do not work with the device in poten-

tially explosive environments, which

contain inflammable liquids, gases or

dusts. Electrical power tools create sparks,

which can ignite dusts or fumes.

c) Keep children and other people away

while you are operating the electrical

tool. Distractions can cause you to lose con-

trol of the device.

2. Electrical safety

a) The mains plug on the device must

match the mains socket. The plug

must not be modified in any way. Do

not use an adapter plug with devices

fitted with a protective earth. Unmodified

plugs and matching sockets reduce the risk of

electric shock.

b) Avoid touching grounded surfaces

such as pipes, radiators, ovens, and

refrigerators. There is an increased risk of

electric shock if your body is earthed.

c) Keep the appliance away from rain

or moisture. The penetration of water into

the electrical device increases the risk of an

electric shock.

d) Do not use the mains lead for purpos-

es it was not intended for, e.g. to carry

the device, to hang up the device or to

pull the mains plug out of the mains

socket. Keep the mains lead away

from heat, oil, sharp edges or moving

parts of the device. Damaged or tangled

cables increase the risk of an electric shock.

e) If you are working outdoors with an

electrical power tool, always use ex-

tension cords that are approved for

outdoor use. The use of an extension cable

suitable for outdoor use reduces the risk of

electric shock.

f) Use a residual current device (RCD)

for protection if the operation of the

electrical power tool in a moist envi-

ronment cannot be avoided. The use of

an RCD reduces the risk of electric shock.

3. Personal safety

a) Remain alert at all times, watch what

you are doing and always proceed

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 55728 PTS 480 A1 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info