Bedienungsanleitung Parkside IAN 55728 PTS 480 A1 (Seite 29 von 34) (Deutsch, Englisch, Holländisch)

745199

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

General safety advice for electrical power tools General safety advice for electrical power tools

ensures that the safety of the electrical power

tool is maintained.

Safety instructions for all saws

a) DANGER: Stay with your hands out

of the cutting area and keep off the

cutting disc. If you hold the saw with both

hands, they cannot be injured by the saw blade.

b) Do not reach underneath the work-

piece. The protective cover will not protect

you from the saw blade under the work piece.

c) Adjust the cutting depth to the thick-

ness of the work piece. Less than the full

width of a tooth should be visible from under

the work piece.

d) Never hold the workpiece with the

hand or lay it over a leg. Secure the

workpiece on a stable fixture. It is

important to fix the work piece safely, to mini-

mise the danger of contact with the body,

jamming of the saw blade or loss of control.

e) Hold the electrical power tool by the

insulated handle surfaces when you

are undertaking work where there is

the danger of the tool striking hidden

electricity cables or the device’s mains

lead. Contact with a live wire could cause

metal parts of the electrical power tool to

become live and lead to electric shock.

f) When cutting along the way always

use a fence or a straight edge guide.

That improves the precision of the cut and mini-

mises the possibility that the saw blade jams.

g) Always use saw blades of the correct

size and with matching mounting hole

(e.g. star-shaped or round). Saw blades

not matching the attachments of the saw run

untrue and lead to loss of control.

h) Never use damaged or wrong saw

blade washers or bolts. The saw blade

washers and screws were specifically devel-

oped for your saw, for optimal performance

and operating security.

Reasons for and how to avoid a kickback:

- A kickback is the sudden reaction, if the saw

blade sticks, jams or is misaligned and the

uncontrolled saw moves out of the work piece

in the direction of the operator.

- If the saw blade wedges, sticks or jams itself

into the closing saw gap, it blocks and the mo-

tor power kicks the saw back into the direction

of the operator.

- If the saw blade is twisted or wrongly aligned

in the saw gap, the teeth of the rear blade edge

can jam in the surface of the work piece, caus-

ing the saw blade to move out of the saw gap

and the saw to jump back in the direction of

the operator.

A kickback is the result of wrong or unsuitable use

of the saw. It can be avoided by taking the in the

following described precautions.

a) Hold the saw with both hands and

bring your arms into a position that

allows you to absorb the forces of the

kickback. Always stand to the side of

the saw blade, never bring the saw

blade into a line with your body. Dur-

ing a kickback the saw can jump backwards,

however, the operator can master the forces of

the kickback with suitable preventive measures.

b) Should the saw blade jam, or you stop

the work, switch the saw off and hold

it still in the work piece, until the saw

blade has come to a standstill. Never

attempt to remove the saw from the

work piece or to pull it backwards, as

long as the saw blade moves, as oth-

erwise a kickback could occur. Find out

and rectify the reason for the jamming of the

saw blade.

c) If you want to restart a saw that is

stuck

in the workpiece, centre the saw blade

in the saw gap and check that the teeth

are not stuck in the workpiece. If the

saw blade jams, it can move out of the work

piece or cause a kickback, when the saw is

started anew.

d) Support big boards to reduce the risk

of a kickback due to a jamming saw

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 55728 PTS 480 A1 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info