Bedienungsanleitung Parkside IAN 56846 PABS 10.8 A1 (Seite 41 von 55) (Englisch, Portugiesisch, Spanisch)

744817

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

41 GB/MT

After you have inserted the required bit and ﬁxed it

in place by turning the chuck

, you can immedi-

ately continue working. The spindle lock releases

itself automatically when the motor is started (by

operation of the ON / OFF switch

2 Gear Drive

Note: Move the gear selector switch

only

after the device has come to a standstill.

In the ﬁrst gear (Gear selector switch

in Position: 1)

you achieve a speed of approx. 400 rpm and a high

torque. This setting is suitable for all screwing tasks.

In the second gear (Gear selector switch

in Position: 2)

It achieves a speed of up to approx. 1300 rpm, for

the carrying out of drilling tasks.

Torque control / drill step

You can use the torque control / drill step

to ad-

just the torque. When the value of the torque

setting is reached, the clutch disengages the drive

connection to the chuck.

j Select a low setting for small screws, soft work

material.

j Select a high setting for large screws, hard

work materials and for the extraction of screws.

j For drilling work, select the drill setting by putting

the torque control / drill setting into the

position.

j For drilling tasks, also push the gear selector

switch

to the front (Position: 2).

Preparing the tool for use

Changing the direction of

rotation / unlocking the device

Unlock the device and change the direction of rota-

tion by pressing the rotational direction switch

to the right or to the left.

Switching ON / OFF

Switching on:

j To start the appliance squeeze on the ON /

OFF switch

and then keep it pressed down.

The light

comes on with a slightly or fully

pressed ON / OFF switch

and illuminates

the working area in poor lighting conditions.

Switching off:

j To stop the appliance, release the ON / OFF

switch

Changing the rotational speed:

The ON / OFF switch

has a variable speed

control. Light pressure on the ON / OFF switch

causes the device to operate at a low speed. In-

creasing the pressure increases the speed.

Activating the lock

j Press the rotational direction switch

into the

middle position. The ON / OFF switch

now blocked.

Tips and Tricks

When screwing into wood, metal and

other materials:

j Screw bits are designated with their dimensions

and their shape. If you are unsure, always try

the particular screw bit out to see whether it sits

in the screw head without any free play.

j Before you use the appliance, check to see

that the screw or drill bit is properly ﬁtted, i.e.

located centrally in the chuck.

Torque:

j Smaller screws and bits in particular can be

easily damaged if you adjust the appliance

with too high a torque and/or rotation speed.

Hard screw bed:

j Particularly high torques can occur, for example

with metal screws tightened by socket tool bits.

Select a lower rotation speed.

Before first use / Preparing the tool for use

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 56846 PABS 10.8 A1 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside IAN 56846 PABS 10.8 A1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info