Bedienungsanleitung Parkside IAN 56846 PABS 10.8 A1 (Seite 42 von 55) (Englisch, Portugiesisch, Spanisch)

744817

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

42 GB/MT

Soft screw bed:

j You should also select a low speed in order not

to damage the wood workpiece surface through

contact with the metal screw head. Use a coun-

tersinker.

When drilling into wood, metal and other

materials:

j With small diameter drill bits use a high drill

speed. For large diameter drill bits, use a low

drill speed.

j For hard materials, select a low drill speed.

For soft materials, select a high drill speed.

j Secure or ﬁx down the workpiece (if possible)

in a clamp or vice.

j Mark the intended position of the hole with a

centre punch or a nail and select a low drill speed

for drilling.

j Take the rotating drill bit out of the hole frequently

so that swarf or drill dust can be re-moved and

the hole and tool is ventilated.

Drilling in metal:

j Use a metal drill bit (HSS). For the best results,

you should cool the bit with oil. Metal drill bits

can also be used to drill into plastic.

Drilling in wood:

j Normally you should use a wood drill with a

centring point. You can screw small screws into

soft wood without the need for pre-drilling.

Cleaning and Maintenance

CAUTION! Place the direction of rotation

switch

into the middle position before carrying

out any tasks on the device, e.g. changing tools or

maintenance, or before transporting or storing the

device. Inadvertent operation of the ON / OFF

switch

may result in injury.

Always pull the mains adapter

out of the mains

socket and remove the battery pack before you

clean or maintain the device.

The Cordless Drill / Screwdriver is maintenance-free.

j Always keep the device clean, dry and free of

oil or grease.

j Clean the device immediately after you have

ﬁnished using it.

j Do not allow any liquids to enter the device.

Use a cloth to clean the housing.

j Never use petrol, solvents or cleaning agents

that might attack plastic.

Service

WARNING!

Have your device

repaired at the service centre or by

qualified specialist personnel using

original manufacturer parts only. This

will ensure that your device remains safe to use.

WARNING!

If the plug or lead needs

to be replaced, always have the

replacement carried out by the manu-

facturer or its service centre. This will

ensure that your device remains safe to use.

Warranty

The warranty for this appliance is for 3

years from the date of purchase. The ap-

pliance has been manufactured with care

and meticulously examined before deliv-

ery. Please retain your receipt as proof

of purchase. In the event of a warranty

claim, please make contact by telephone

with our Service Department. Only in this

way can a post-free despatch for your

goods be assured.

The warranty covers only claims for material and

maufacturing defects, but not for transport damage,

for wearing parts or for damage to fragile compo-

nents, e.g. buttons or batteries. This product is for

private use only and is not intended for commercial

use.

The warranty is void in the case of abusive and im-

proper handling, use of force and internal tamper-

ing not carried out by our authorized service branch.

Preparing the tool for use / Cleaning and Maintenance / Service / Warranty

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 56846 PABS 10.8 A1 Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside IAN 56846 PABS 10.8 A1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info