Bedienungsanleitung Parkside IAN 64576 PDFP 500 A1 (Seite 34 von 45) (Englisch, Portugiesisch, Spanisch)

744931

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

34 GB/MT

regulator

as described below under “Increas-

ing the air quantity” up to the maximum setting.

Increasing the air quantity:

Note: Increasing the amount of air is generally

advisable when the degree of atomization is too

coarse.

j Turn the air quantity regulator

in an anti-

clockwise direction.

Reducing the air quantity:

Note: Reducing the amount of air is generally

advisable when the paint spray is too strong.

j Turn the air quantity regulator

in a clock-

wise direction.

Maintenance and Cleaning

Note: Thorough cleaning after each use is very

important for safety and operation. Otherwise, for

example, the nozzle will become clogged and the

proper functioning of the device can no longer be

guaranteed.

Wear suitable protective gloves

when carrying out cleaning work.

J Do not use any hydrocarbon-containing halogen

solvents such as trichloromethyl, ethyl chloride,

etc., as they undergo chemi-cal reactions with

some materials in the paint spray gun. This can

lead to dangerous reactions

CAUTION! Never place the paint spray gun

completely in solvent.

J After every use spray thinner (only in the

open air – danger of explosion!) or

water through the device.

j Use the cleaning brush supplied or a cloth to

clean the housing. Never use petrol, solvents or

cleaning agents which attack plastic.

j First unscrew the nozzle head

by turning in

an anticlockwise direction

j Loosen and remove the nozzle

by unscrewing

it with the installation spanner

in an anti-

clockwise direction - see also Figure B. Clean

the needle

and the nozzle

carefully

with the brush

- see also ﬁgures C and D.

After cleaning, screw the nozzle head

back

on by turning it in a clockwise direction, and

tighten it with the spanner

fest.

j For rust protection you can spray sewing

machine oil through the device after cleaning.

j Lubricate all moving parts from time to time.

j After the nozzle has been cleaned the thread

and seal have to be lightly treated with grease.

j Do not use any silicone-containing lubricants.

j Store compressed air equipment only in dry

areas.

Service

Compressed air-oper-

ated equipment should only be re

paired

by qualified specialists and with origi

nal

spare parts. This will ensure that devices

remain safe.

Warranty

The warranty for this appliance is for 3

years from the date of purchase. The ap-

pliance has been manufactured with care

and meticulously examined before deliv-

ery. Please retain your receipt as proof

of purchase. In the event of a warranty

claim, please make contact by telephone

with our Service Department. Only in this

way can a post-free despatch for your

goods be assured.

The warranty covers only claims for material and

maufacturing defects, but not for transport damage,

for wearing parts or for damage to fragile compo-

nents, e.g. buttons or batteries. This product is for

private use only and is not intended for commercial

use.

The warranty is void in the case of abusive and im-

proper handling, use of force and internal tampering

not carried out by our authorized service branch.

Your statutory rights are not restricted in any way

by this warranty.

Initial use / Maintenance and Cleaning / Service / Warranty

64576_par_Druckluft-Farbspritzpistole_content_LB5.indd 34 31.03.11 10:49

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 64576 PDFP 500 A1 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside IAN 64576 PDFP 500 A1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info