Bedienungsanleitung Parkside IAN 73782 PDT 40 B2 (Seite 31 von 37) (Deutsch, Englisch, Holländisch, Französisch)

745069

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

31 GB

Introduction / Safety of the fastener driving tool

Recommended pressure

range: 4 to 7.5 bar

Air consumption per

drive in process: approx. 0.13 litre per

driving-in process

Recommended lubricant:

Compressed air special oil

Loading capacity: 100 pcs.

Nail lengths: 15 mm, 20 mm

25 mm, 30 mm,

32 mm, 35 mm,

38 mm, 40 mm,

45 mm, 50 mm,

Staple lengths: 10–40 mm

Staple width: 5.7 mm

Recommended

Hose diameter: ∅ 9 mm

Compressed air quality: Cleaned, oil-misted

and condensate-free

Noise and vibration data:

Measured values for noise are determined in ac-

cordance with EN 12549:1999, EN ISO 4871.

The A-weighted sound pressure level of the device is

typically 90.6 dB (A). Uncertainty K = 3 dB. The

sound level while working can exceed 103.6 dB (A).

These values are characteristic values referenced to

the device and do not reﬂect noise development at

the work location. Noise development at the work

location depends e.g. on the work environment, the

workpiece, the workpiece support and the number

of fastener driving processes.

In correspondence with conditions at the work loca-

tion, individual noise reduction measures may need

to be carried out, such as placing the workpiece on

a noise-suppressing surface, clamping or covering

to prevent workpiece vibration and adjusting to the

minimum pressure required by the work process. In

certain cases, wearing personal hearing protection

is require.

Wear hearing protection!

Vibration values in accordance with

ISO 8662-11:1999:

Vibration emission value a

h,D

= 12.380 m / s

Uncertainty K = 1.5 m / s

Mechanical impact (vibration)

The vibration value for the fastener driving device was

determined in accordance with ISO 8662-11:1999 —

Hand-held portable power tools – Measurement of

vibrations at the handle — Fastener driving tools

(see technical data). The value is referenced to the

device and does not represent the inﬂuence on the

hand-arm system when the device is used. Inﬂuence

on the hand-arm system when using the device de-

pends on e.g. gripping force, pressing force, work-

ing direction, air pressure set, the workpiece and its

position.

Safety of the fastener

driving tool

Please read all the safety

information and instructions. Failure to com-

ply with the safety instructions and instructions can

result in severe injuries and / or damage to pro

perty.

PLEASE RETAIN ALL SAFETY INFORMATION

AND INSTRUCTIONS FOR FUTURE REFERENCE.

Each time before starting work, check

for flawless functioning of the safety

and triggering devices as well as the

firm fit of all bolts and nuts.

Do not conduct any improper manipu-

lation of the fastener driving tool.

Do not dismount or block any part of

the fastener driving tool, such a trig-

ger lock.

Do not conduct any „emergency re-

pairs“ with unsuitable materials.

The fastener driving tool must be reg-

ularly and properly maintained as

specified by the manufacturer.

Prevent anything that would weaken

or damage the device, e.g. by:

– stamping or engraving,

Introduction

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 73782 PDT 40 B2 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info