Bedienungsanleitung Parkside IAN 73782 PDT 40 B2 (Seite 32 von 37) (Deutsch, Englisch, Holländisch, Französisch)

745069

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

32 GB

Safety of the fastener driving tool / Preparing the product for use / OperationSafety of the fastener driving tool

– alterations not permitted by the

manufacturer,

– guiding on templates made of hard

material, e.g. steel,

– permitting to fall onto or slide across

the floor,

– using as a hammer,

– every type of external force.

Work safety

Never point a fastener driving tool that

is ready to use directly at yourself,

other persons or animals.

During work, hold the fastener driving

tool so that head and body can not be

injured by possible kickback due to a

fault in the power supply or from hard

places in the workpiece.

Never trigger the fastener driving tool

into empty space. Following this instruction

will prevent danger due to uncontrolled ﬂying

fasteners and overloading the device.

Before transporting, disconnect the

fastener driving tool from the com-

pressed air network, particularly when

using ladders or are moving with an

unaccustomed body posture.

At the workplace, only carry the fas-

tener driving tool by its grip and never

with the trigger actuated.

Pay attention to workplace conditions.

Fasteners may strike completely through thin

workpieces or slide oﬀ corners or edges to

cause a danger to persons.

Use suitable personal protec-

tion equipment, e.g. hearing

and eye protection. Wearing personal

protective devices such as dust mask, non-slip

safety shoes, safety helmet or hearing protectors,

depending on the type of fastener driving tool

and its application, reduces the risk of injuries.

Additional safety

information for

compressed air tackers

RISK OF INJURY! Never

exceed the maximum permissible operating

pressure of 8 bar. Use a pressure reducer to

adjust the operating pressure.

RISK OF INJURY! Never

use oxygen or other ﬂammable gases as en-

ergy source.

Keep your working area clean and

well lit. Untidy or poorly lit working areas

can lead to accidents.

Keep children and other indi-

viduals away from the fas-

tener driving tool during use.

Distractions can cause you to lose control of

the device.

Remain alert at all times, watch what

you are doing and always proceed

with caution when working with a

fastener driving tool. Do not use any

fastener driving tool if you are tired

or under the influence of drugs, alcohol

or medication. One moment of carelessness

when using the fastener driving tool may result

in serious injuries.

Avoid placing your body in an unnat-

ural position. Keep proper footing

and balance at all times. By doing this you

will be in a better position to control the fas-

tener driving tool in unforeseen circumstances.

Before any repair and maintenance work or

transport, remove the device from the com-

pressed air source.

RISK OF INJURY! Do not use the

device on scaﬀolds or ladders.

Never use hydrogen, oxygen, car-

bon dioxide or other bottled gasses

to power this tool as doing so may

result in an explosion and thus may cause se-

vere injuries.

RISK OF INJURY! Do not use the device if

the trigger lock

is damaged or has been

removed. Otherwise injuries may result.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 73782 PDT 40 B2 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info