745096
33
Zoom out
Zoom in
Vorherige Seite
1/41
Nächste Seite
33 GB
Safety Information
Safety Information / Before starting the equipment / Operation
Consumption at 2/3 load: approx. 1.36 l/h
Weight: 42 kg
LpA sound pressure level: 74,2 dB(A)
Uncertainty K: 2 dB(A)
LWA sound power level 96 dB(A)
K uncertainty: 2,3 dB(A)
Power factor cos ϕ: 1
Power class: G1
Max. temperature: 40°C
Max. altitude (above
mean sea level):
1,000 m
Spark plug: LD F6TC
Operating mode S1 (continuous operation)
The equipment can be continuously operated with
the quoted power output.
Operating mode S2 (temporary operation)
The equipment may be temporarily operated with
the quoted power output 2 min.
Before starting the equipment
Assembly
The installation of the equipment requires
two open-ended wrenches (size 12).
Assemble all parts before filling in fuel and oil
in order to prevent the fluids from leaking out.
Assemble the foot
16
, wheels
14
and push
bar
18
as shown in Figures E - H.
To mount the wheels, first slide the axle
15
through the mountings on the bottom of the
generator and fit the wheels
14
as shown on
Figure F.
Electrical safety
J Electric supply cables and connected equipment
must be in perfect condition.
J The generator is to be operated only with
equipment whose voltage specifications conform
to the generator’s output voltage.
J Never connect the generator to the power
supply (socket-outlet).
J Keep the cable length to the consumer as short
as possible.
Environmental protection
Dispose of soiled maintenance material and
operating materials at the appropriate collection
point.
Recycle packaging material, metal and plastics.
Connecting to earth
The housing must be connected to earth in
order to discharge static electricity. To do this,
connect one end of a cable to the earth con-
nection
4
on the generator (Fig. B) and the
other end to an external earth.
Operation
IMPORTANT! You must fill up with engine oil
(approx. 0.6 l) and fuel before you can start the
engine.
Check the fuel level and engine
oil level, refill if
necessary by topping up the oil though the oil
fille
r screw
7
and the petrol through the petrol
filler cap
2
.
Make sure that the generator has sufficient
ventilation.
Make sure that the ignition cable is secured to
the spark plug.
Inspect the immediate vicinity of the generator.
Disconnect any electrical equipment which
may already be connected to the generator.
33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Parkside IAN 85052 PSE 2800 B2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Parkside IAN 85052 PSE 2800 B2

Parkside IAN 85052 PSE 2800 B2 Bedienungsanleitung - Deutsch, Englisch, Holländisch - 41 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info